// IMPORTS ---------------------------------------------------------------------

import gleam/dynamic/decode
import gleam/http
import gleam/http/request.{type Request}
import gleam/json.{type Json}
import gleam/result
import gleam/uri.{type Uri}
import lustre/dev/simulate.{type Simulation} as lustre_simulate
import lustre/effect.{type Effect}

@target(erlang)
import gleam/bit_array
@target(erlang)
import gleam/erlang/process
@target(erlang)
import gleam/http/response.{type Response, Response}
@target(erlang)
import gleam/httpc

@target(javascript)
import gleam/fetch
@target(javascript)
import gleam/http/response.{type Response}
@target(javascript)
import gleam/javascript/promise

// TYPES -----------------------------------------------------------------------

/// A request might fail for a number of reasons. This type is a high-level
/// wrapper over the different kinds of errors that might occur when creating and
/// executing an HTTP request.
///
pub type Error {
  /// This error can happen when we successfully receive an HTTP response but the
  /// body of the response is invalid or not well-formed.
  ///
  BadBody
  /// This error can happen when the URL string provided to the [`get`](#get) or
  /// [`post`](#post) helpers is not well-formed.
  ///
  BadUrl(String)
  /// This error can happen when the HTTP response status code is not in the `2xx`
  /// range but a handler expected it to be.
  ///
  HttpError(Response(String))
  /// This error is returned when decoding a JSON response body fails.
  ///
  JsonError(json.DecodeError)
  /// This error can happen when the HTTP request fails to connect to the server
  /// or there is some other connectivity issue.
  ///
  NetworkError
  /// This error can be returned by a handler when it does not know how to handle
  /// a response. For example, the [`expect_json`](#expect_json) handler will return
  /// this error if the response content-type is not `"application/json"`.
  ///
  UnhandledResponse(Response(String))
}

/// A handler is a function that knows how to take the result of an HTTP request
/// and turn it into a message that can be dispatched back to your `update`
/// function. rsvp exposess a number of handlers for common scenarios:
///
/// - [`expect_json`](#expect_json) to ensure a response's content-type is
///   `"application/json"` and run a JSON decoder on that body.
///
/// - [`expect_text`](#expect_text) to ensure a response's content-type specifies
///   `"text/"` and return the body as a string.
///
/// - [`expect_ok_response`](#expect_ok_response) to handle any response with a
///   2xx status code.
///
/// - [`expect_any_response`](#expect_any_response) to handle any HTTP response,
///   including 4xx and 5xx errors.
///
pub opaque type Handler(msg) {
  Handler(run: fn(Result(Response(String), Error)) -> msg)
}

// HANDLERS --------------------------------------------------------------------

/// A handler that runs a JSON decoder on a response body and returns the result
/// as a message. This handler will check the following conditions:
///
/// - The response status code is `2xx`.
///
/// - The response content-type is `"application/json"`
///
/// - The response body can be decoded using the provided JSON decoder
///
/// If any of these conditions are not met, an `Error` will be returned instead.
/// The specific error will depend on which condition failed:
///
/// - `4xx` and `5xx` status codes will return `HttpError`
///
/// - Other non `2xx` status codes will return `UnhandledResponse`
///
/// - A missing or incorrect `content-type` header will return `UnhandledResponse`
///
/// - A JSON decoding error will return `JsonError`
///
/// **Note**: if you need more advanced handling of the request body directly, you
/// should use the more-general [`expect_ok_response`](#expect_ok_response) or
/// [`expect_any_response`](#expect_any_response) handlers.
///
pub fn expect_json(
  decoder: decode.Decoder(a),
  handler: fn(Result(a, Error)) -> msg,
) -> Handler(msg) {
  use result <- expect_json_response

  result
  |> result.try(decode_json_body(_, decoder))
  |> handler
}

fn expect_json_response(
  handler: fn(Result(Response(String), Error)) -> msg,
) -> Handler(msg) {
  use result <- expect_ok_response

  handler({
    use response <- result.try(result)

    case response.get_header(response, "content-type") {
      Ok("application/json") -> Ok(response)
      Ok("application/json;" <> _) -> Ok(response)
      _ -> Error(UnhandledResponse(response))
    }
  })
}

/// Handle the body of a plain text response. This handler will check the
/// following conditions:
///
/// - The response status code is `2xx`.
///
/// - The response content-type specifies `"text/"` such as `"text/plain"` or
///   `"text/html"`.
///
/// If any of these conditions are not met, an `Error` will be returned instead.
/// The specific error will depend on which condition failed:
///
/// - `4xx` and `5xx` status codes will return `HttpError`
///
/// - Other non `2xx` status codes will return `UnhandledResponse`
///
/// - A missing or incorrect `content-type` header will return `UnhandledResponse`
///
/// **Note**: if you need more advanced handling of the request body directly, you
/// should use the more-general [`expect_ok_response`](#expect_ok_response) or
/// [`expect_any_response`](#expect_any_response) handlers.
///
pub fn expect_text(handler: fn(Result(String, Error)) -> msg) -> Handler(msg) {
  use result <- expect_text_response

  result
  |> result.map(fn(response) { response.body })
  |> handler
}

fn expect_text_response(
  handler: fn(Result(Response(String), Error)) -> msg,
) -> Handler(msg) {
  use result <- expect_ok_response

  handler({
    use response <- result.try(result)

    case response.get_header(response, "content-type") {
      Ok("text/" <> _) -> Ok(response)
      _ -> Error(UnhandledResponse(response))
    }
  })
}

/// Handle any response with a `2xx` status code. This handler will return an
/// `Error` if the response status code is not in the `2xx` range. The specific
/// error will depend on the status code:
///
/// - `4xx` and `5xx` status codes will return `HttpError`
///
/// - Other non `2xx` status codes will return `UnhandledResponse`
///
/// **Note**: if you need to handle HTTP responses with different status codes,
/// you should use the more-general [`expect_any_response`](#expect_any_response)
/// handler.
///
pub fn expect_ok_response(
  handler: fn(Result(Response(String), Error)) -> msg,
) -> Handler(msg) {
  use result <- Handler

  handler({
    use response <- result.try(result)

    case response.status {
      code if code >= 200 && code < 300 -> Ok(response)
      code if code >= 400 && code < 600 -> Error(HttpError(response))
      _ -> Error(UnhandledResponse(response))
    }
  })
}

/// Handle any HTTP response, regardless of status code. Your custom handler will
/// still have to handle potential errors such as network errors or malformed
/// responses.
///
/// It is uncommon to need a handler this low-level, instead you can consider the
/// following more-specific handlers:
///
/// - [`expect_ok_response`](#expect_ok_response) to handle any response with a
///   `2xx` status code.
///
/// - [`expect_json`](#expect_json) to handle responses from JSON apis
///
pub fn expect_any_response(
  handler: fn(Result(Response(String), Error)) -> msg,
) -> Handler(msg) {
  Handler(handler)
}

// REQUESTS --------------------------------------------------------------------

/// A convenience function to send a `GET` request to a URL and handle the response
/// using a [`Handler`](#Handler).
///
/// **Note**: if you need more control over the kind of request being sent, for
/// example to set additional headers or use a different HTTP method, you should
/// use the more-general [`send`](#send) function instead.
///
/// **Note**: On the **JavaScript** target this will use the `fetch` API. Make
/// sure you have a polyfill for it if you need to support older browsers or
/// server-side runtimes that don't have it.
///
/// **Note**: On the **Erlang** target this will use the `httpc` module. Each
/// request will start a new linked process to make and handle the request.
///
pub fn get(url: String, handler: Handler(msg)) -> Effect(msg) {
  case to_uri(url) {
    Ok(uri) ->
      case request.from_uri(uri) {
        Ok(request) -> send(request, handler)
        Error(_) -> reject(BadUrl(url), handler)
      }

    Error(err) -> reject(err, handler)
  }
}

/// A convenience function for sending a POST request with a JSON body and handle
/// the response with a handler function. This will automatically set the
/// `content-type` header to `application/json` and handle requests to relative
/// URLs if this effect is running in a browser.
///
/// **Note**: if you need more control over the kind of request being sent, for
/// example to set additional headers or use a different HTTP method, you should
/// use the more-general [`send`](#send) function instead.
///
/// **Note**: On the **JavaScript** target this will use the `fetch` API. Make
/// sure you have a polyfill for it if you need to support older browsers or
/// server-side runtimes that don't have it.
///
/// **Note**: On the **Erlang** target this will use the `httpc` module. Each
/// request will start a new linked process to make and handle the request.
///
pub fn post(url: String, body: Json, handler: Handler(msg)) -> Effect(msg) {
  case to_uri(url) {
    Ok(uri) ->
      case request.from_uri(uri) {
        Ok(request) ->
          request
          |> request.set_method(http.Post)
          |> request.set_header("content-type", "application/json")
          |> request.set_body(json.to_string(body))
          |> send(handler)
        Error(_) -> reject(BadUrl(url), handler)
      }

    Error(err) -> reject(err, handler)
  }
}

/// A convenience function for sending a PUT request with a JSON body and handle
/// the response with a handler function. This will automatically set the
/// `content-type` header to `application/json` and handle requests to relative
/// URLs if this effect is running in a browser.
///
/// **Note**: if you need more control over the kind of request being sent, for
/// example to set additional headers or use a different HTTP method, you should
/// use the more-general [`send`](#send) function instead.
///
/// **Note**: On the **JavaScript** target this will use the `fetch` API. Make
/// sure you have a polyfill for it if you need to support older browsers or
/// server-side runtimes that don't have it.
///
/// **Note**: On the **Erlang** target this will use the `httpc` module. Each
/// request will start a new linked process to make and handle the request.
///
pub fn put(url: String, body: Json, handler: Handler(msg)) -> Effect(msg) {
  case to_uri(url) {
    Ok(uri) ->
      case request.from_uri(uri) {
        Ok(request) ->
          request
          |> request.set_method(http.Put)
          |> request.set_header("content-type", "application/json")
          |> request.set_body(json.to_string(body))
          |> send(handler)
        Error(_) -> reject(BadUrl(url), handler)
      }

    Error(err) -> reject(err, handler)
  }
}

/// A convenience function for sending a PATCH request with a JSON body and handle
/// the response with a handler function. This will automatically set the
/// `content-type` header to `application/json` and handle requests to relative
/// URLs if this effect is running in a browser.
///
/// **Note**: if you need more control over the kind of request being sent, for
/// example to set additional headers or use a different HTTP method, you should
/// use the more-general [`send`](#send) function instead.
///
/// **Note**: On the **JavaScript** target this will use the `fetch` API. Make
/// sure you have a polyfill for it if you need to support older browsers or
/// server-side runtimes that don't have it.
///
/// **Note**: On the **Erlang** target this will use the `httpc` module. Each
/// request will start a new linked process to make and handle the request.
///
pub fn patch(url: String, body: Json, handler: Handler(msg)) -> Effect(msg) {
  case to_uri(url) {
    Ok(uri) ->
      case request.from_uri(uri) {
        Ok(request) ->
          request
          |> request.set_method(http.Patch)
          |> request.set_header("content-type", "application/json")
          |> request.set_body(json.to_string(body))
          |> send(handler)
        Error(_) -> reject(BadUrl(url), handler)
      }

    Error(err) -> reject(err, handler)
  }
}

/// A convenience function for sending a DELETE request with a JSON body and handle
/// the response with a handler function. This will automatically set the
/// `content-type` header to `application/json` and handle requests to relative
/// URLs if this effect is running in a browser.
///
/// **Note**: if you need more control over the kind of request being sent, for
/// example to set additional headers or use a different HTTP method, you should
/// use the more-general [`send`](#send) function instead.
///
/// **Note**: On the **JavaScript** target this will use the `fetch` API. Make
/// sure you have a polyfill for it if you need to support older browsers or
/// server-side runtimes that don't have it.
///
/// **Note**: On the **Erlang** target this will use the `httpc` module. Each
/// request will start a new linked process to make and handle the request.
///
pub fn delete(url: String, body: Json, handler: Handler(msg)) -> Effect(msg) {
  case to_uri(url) {
    Ok(uri) ->
      case request.from_uri(uri) {
        Ok(request) ->
          request
          |> request.set_method(http.Delete)
          |> request.set_header("content-type", "application/json")
          |> request.set_body(json.to_string(body))
          |> send(handler)
        Error(_) -> reject(BadUrl(url), handler)
      }

    Error(err) -> reject(err, handler)
  }
}

/// Send a [`Request`](https://hexdocs.pm/gleam_http/gleam/http/request.html#Request)
/// and dispatch a message back to your `update` function when the response is
/// handled.
///
/// For simple requests, you can use the more-convenient [`get`](#get) and
/// [`post`](#post) functions instead.
///
/// **Note**: On the **JavaScript** target this will use the `fetch` API. Make
/// sure you have a polyfill for it if you need to support older browsers or
/// server-side runtimes that don't have it.
///
/// **Note**: On the **Erlang** target this will use the `httpc` module. Each
/// request will start a new linked process to make and handle the request.
///
pub fn send(request: Request(String), handler: Handler(msg)) -> Effect(msg) {
  do_send(request, handler)
}

@target(erlang)
fn do_send(request: Request(String), handler: Handler(msg)) -> Effect(msg) {
  use dispatch <- effect.from

  process.spawn(fn() {
    httpc.send(request)
    |> result.map_error(fn(error) {
      case error {
        httpc.InvalidUtf8Response -> BadBody
        // Catch-all covers the remaining two httpc errors. We do this because
        // we support both httpc 4.x and 5.x and we don't want errors or warnings
        // for folks stuck on 4.x.
        _ -> NetworkError
      }
    })
    |> handler.run
    |> dispatch
  })

  Nil
}

@target(javascript)
fn do_send(request: Request(String), handler: Handler(msg)) -> Effect(msg) {
  use dispatch <- effect.from

  fetch.send(request)
  |> promise.try_await(fetch.read_text_body)
  |> promise.map(
    result.map_error(_, fn(error) {
      case error {
        fetch.NetworkError(_) -> NetworkError
        fetch.UnableToReadBody -> BadBody
        fetch.InvalidJsonBody -> BadBody
      }
    }),
  )
  |> promise.map(handler.run)
  |> promise.tap(dispatch)

  Nil
}

/// Send a [`Request`](https://hexdocs.pm/gleam_http/gleam/http/request.html#Request)
/// with a `BitArray` body and dispatch a message back to your `update` function
/// when the response is handled.
///
/// Rsvp requires all responses to be UTF-8 encoded strings, and `BitArray`
/// responses that cannot be decoded as UTF-8 will return a `BadBody` error.
///
pub fn send_bits(
  request: Request(BitArray),
  handler: Handler(msg),
) -> Effect(msg) {
  do_send_bits(request, handler)
}

@target(erlang)
fn do_send_bits(
  request: Request(BitArray),
  handler: Handler(msg),
) -> Effect(msg) {
  use dispatch <- effect.from

  process.spawn(fn() {
    httpc.send_bits(request)
    |> result.map_error(fn(error) {
      case error {
        httpc.InvalidUtf8Response -> BadBody
        // Catch-all covers the remaining two httpc errors. We do this because
        // we support both httpc 4.x and 5.x and we don't want errors or warnings
        // for folks stuck on 4.x.
        _ -> NetworkError
      }
    })
    |> result.try(fn(response) {
      case bit_array.to_string(response.body) {
        Ok(body) -> Ok(Response(..response, body:))
        Error(_) -> Error(BadBody)
      }
    })
    |> handler.run
    |> dispatch
  })

  Nil
}

@target(javascript)
fn do_send_bits(
  request: Request(BitArray),
  handler: Handler(msg),
) -> Effect(msg) {
  use dispatch <- effect.from

  fetch.send_bits(request)
  |> promise.try_await(fetch.read_text_body)
  |> promise.map(
    result.map_error(_, fn(error) {
      case error {
        fetch.NetworkError(_) -> NetworkError
        fetch.UnableToReadBody -> BadBody
        fetch.InvalidJsonBody -> BadBody
      }
    }),
  )
  |> promise.map(handler.run)
  |> promise.tap(dispatch)

  Nil
}

//

/// Simulate a response in a simulated application. This runs the provided handler
/// against the response and dispatches the message to your simulated application.
///
pub fn simulate(
  simulation: Simulation(model, msg),
  response response: Response(String),
  handler handler: Handler(msg),
) -> Simulation(model, msg) {
  lustre_simulate.message(simulation, handler.run(Ok(response)))
}

// UTILS -----------------------------------------------------------------------

fn reject(err: Error, handler: Handler(msg)) -> Effect(msg) {
  use dispatch <- effect.from

  Error(err)
  |> handler.run
  |> dispatch
}

fn decode_json_body(
  response: Response(String),
  decoder: decode.Decoder(a),
) -> Result(a, Error) {
  response.body
  |> json.parse(decoder)
  |> result.map_error(JsonError)
}

fn to_uri(uri_string: String) -> Result(Uri, Error) {
  case uri_string {
    "./" <> _ | "/" <> _ -> parse_relative_uri(uri_string)
    _ -> uri.parse(uri_string)
  }
  |> result.replace_error(BadUrl(uri_string))
}

/// The standard library [`uri.parse`](https://hexdocs.pm/gleam_stdlib/0.45.0/gleam/uri.html#parse)
/// function does not support relative URIs. When running in the browser, however,
/// we have enough information to resolve relative URIs into complete ones!
///
/// This function will always fail when running on the server, but in the browser
/// it will resolve relative URIs based on the current page's URL
///
@external(javascript, "./rsvp.ffi.mjs", "from_relative_url")
pub fn parse_relative_uri(_uri_string: String) -> Result(Uri, Nil) {
  Error(Nil)
}