defmodule PhoenixKit.Modules.Emails.Web.Settings do
  @moduledoc """
  LiveView for email system configuration and settings management.

  This module provides a comprehensive interface for managing all aspects
  of the PhoenixKit email system, including:

  - **System Control**: Enable/disable the entire email system
  - **Storage Settings**: Configure email body and header storage
  - **AWS SES Integration**: Manage SES event tracking and configuration
  - **Data Management**: Set retention periods and sampling rates
  - **Advanced Features**: Configure compression and S3 archival
  - **SQS Configuration**: Control SQS polling and message processing

  ## Route

  This LiveView is mounted at `{prefix}/admin/settings/emails` and requires
  appropriate admin permissions.

  Note: `{prefix}` is your configured PhoenixKit URL prefix (default: `/phoenix_kit`).

  ## Features

  - Real-time settings updates with immediate effect
  - AWS infrastructure configuration (SES, SNS, SQS)
  - Data lifecycle management (retention, compression, archival)
  - Performance tuning (sampling rate, polling intervals)
  - Validation with user-friendly error messages

  ## Permissions

  Access is restricted to users with admin or owner roles in PhoenixKit.
  """

  use PhoenixKitWeb, :live_view

  alias PhoenixKit.AWS.CredentialsVerifier
  alias PhoenixKit.AWS.InfrastructureSetup
  alias PhoenixKit.Config.AWS
  alias PhoenixKit.Modules.Emails
  alias PhoenixKit.Modules.Emails.SQSPollingJob
  alias PhoenixKit.Settings
  alias PhoenixKit.Utils.Routes

  @dialyzer {:nowarn_function, handle_event: 3}

  def mount(_params, session, socket) do
    # Get current path for navigation
    current_path = get_current_path(socket, session)

    # Get project title from settings
    project_title = Settings.get_project_title()

    # Load email configuration
    email_config = Emails.get_config()

    # Load AWS settings
    aws_settings = %{
      access_key_id: Settings.get_setting("aws_access_key_id", ""),
      secret_access_key: Settings.get_setting("aws_secret_access_key", ""),
      region: Settings.get_setting("aws_region", ""),
      sqs_queue_url: Settings.get_setting("aws_sqs_queue_url", ""),
      sqs_dlq_url: Settings.get_setting("aws_sqs_dlq_url", ""),
      sqs_queue_arn: Settings.get_setting("aws_sqs_queue_arn", ""),
      sns_topic_arn: Settings.get_setting("aws_sns_topic_arn", ""),
      ses_configuration_set: Settings.get_setting("aws_ses_configuration_set", ""),
      sqs_polling_interval_ms: Settings.get_setting("sqs_polling_interval_ms", "5000")
    }

    socket =
      socket
      |> assign(:current_path, current_path)
      |> assign(:page_title, "Emails")
      |> assign(:project_title, project_title)
      |> assign(:email_enabled, email_config.enabled)
      |> assign(:email_save_body, email_config.save_body)
      |> assign(:email_save_headers, Emails.save_headers_enabled?())
      |> assign(:email_ses_events, email_config.ses_events)
      |> assign(:email_retention_days, email_config.retention_days)
      |> assign(:email_sampling_rate, email_config.sampling_rate)
      |> assign(:email_compress_body, email_config.compress_after_days)
      |> assign(:email_archive_to_s3, email_config.archive_to_s3)
      |> assign(:sqs_polling_enabled, email_config.sqs_polling_enabled)
      |> assign(:sqs_polling_interval_ms, email_config.sqs_polling_interval_ms)
      |> assign(:sqs_max_messages_per_poll, email_config.sqs_max_messages_per_poll)
      |> assign(:sqs_visibility_timeout, email_config.sqs_visibility_timeout)
      |> assign(:aws_settings, aws_settings)
      |> assign(:saving, false)
      |> assign(:setting_up_aws, false)
      |> assign(:running_cleanup, false)
      |> assign(:running_compression, false)
      |> assign(:running_archival, false)
      |> assign(:updating_compress_days, false)
      |> assign(:compress_days_focused, false)
      |> assign(:compress_days_changed, false)
      |> assign(
        :sender_settings,
        %{
          from_email: Settings.get_setting("from_email", "noreply@localhost"),
          from_name:
            Settings.get_setting("from_name", PhoenixKit.Config.get(:from_name, "PhoenixKit"))
        }
      )
      |> assign(:saving_sender, false)
      |> assign(:verifying_credentials, false)
      # :pending, :verifying, :success, :error
      |> assign(:credential_verification_status, :pending)
      |> assign(:credential_verification_message, "")
      |> assign(:available_regions, [])
      |> assign(:regions_loaded, false)
      |> assign(:selected_region, "")
      |> assign(:aws_permissions, %{})

    {:ok, socket}
  end

  def handle_event("toggle_emails", _params, socket) do
    # Toggle email system
    new_enabled = !socket.assigns.email_enabled

    result =
      if new_enabled do
        Emails.enable_system()
      else
        Emails.disable_system()
      end

    case result do
      {:ok, _setting} ->
        socket =
          socket
          |> assign(:email_enabled, new_enabled)
          |> put_flash(
            :info,
            if(new_enabled,
              do: "Email system enabled",
              else: "Email system disabled"
            )
          )

        {:noreply, socket}

      {:error, _changeset} ->
        socket = put_flash(socket, :error, "Failed to update email system")
        {:noreply, socket}
    end
  end

  def handle_event("toggle_email_save_body", _params, socket) do
    # Toggle email body saving
    new_save_body = !socket.assigns.email_save_body

    result = Emails.set_save_body(new_save_body)

    case result do
      {:ok, _setting} ->
        socket =
          socket
          |> assign(:email_save_body, new_save_body)
          |> put_flash(
            :info,
            if(new_save_body,
              do: "Email body saving enabled",
              else: "Email body saving disabled"
            )
          )

        {:noreply, socket}

      {:error, _changeset} ->
        socket = put_flash(socket, :error, "Failed to update email body saving setting")
        {:noreply, socket}
    end
  end

  def handle_event("toggle_email_save_headers", _params, socket) do
    # Toggle email headers saving
    new_save_headers = !socket.assigns.email_save_headers

    result = Emails.set_save_headers(new_save_headers)

    case result do
      {:ok, _setting} ->
        socket =
          socket
          |> assign(:email_save_headers, new_save_headers)
          |> put_flash(
            :info,
            if(new_save_headers,
              do: "Email headers saving enabled",
              else: "Email headers saving disabled"
            )
          )

        {:noreply, socket}

      {:error, _changeset} ->
        socket = put_flash(socket, :error, "Failed to update email headers saving setting")
        {:noreply, socket}
    end
  end

  def handle_event("toggle_email_ses_events", _params, socket) do
    # Toggle AWS SES events tracking
    new_ses_events = !socket.assigns.email_ses_events

    result = Emails.set_ses_events(new_ses_events)

    case result do
      {:ok, _setting} ->
        socket =
          socket
          |> assign(:email_ses_events, new_ses_events)
          |> put_flash(
            :info,
            if(new_ses_events,
              do: "AWS SES events tracking enabled",
              else: "AWS SES events tracking disabled"
            )
          )

        # Auto-load regions when enabling SES events
        socket = maybe_auto_load_regions(socket, new_ses_events)

        {:noreply, socket}

      {:error, _changeset} ->
        socket = put_flash(socket, :error, "Failed to update AWS SES events tracking")
        {:noreply, socket}
    end
  end

  def handle_event("update_email_sampling_rate", params, socket) do
    # Handle both parameter structures: %{"sampling_rate" => value} and %{"value" => value}
    value = Map.get(params, "sampling_rate") || Map.get(params, "value")

    case Integer.parse(value) do
      {sampling_rate, _} when sampling_rate >= 0 and sampling_rate <= 100 ->
        case Emails.set_sampling_rate(sampling_rate) do
          {:ok, _setting} ->
            socket =
              socket
              |> assign(:email_sampling_rate, sampling_rate)
              |> put_flash(:info, "Email sampling rate updated to #{sampling_rate}%")

            {:noreply, socket}

          {:error, _changeset} ->
            socket = put_flash(socket, :error, "Failed to update email sampling rate")
            {:noreply, socket}
        end

      _ ->
        socket = put_flash(socket, :error, "Please enter a valid number between 0 and 100")
        {:noreply, socket}
    end
  end

  def handle_event("toggle_sqs_polling", _params, socket) do
    # Toggle SQS polling
    new_sqs_polling = !socket.assigns.sqs_polling_enabled

    result = Emails.set_sqs_polling(new_sqs_polling)

    case result do
      {:ok, _setting} ->
        # Cancel scheduled jobs when disabling
        unless new_sqs_polling do
          SQSPollingJob.cancel_scheduled()
        end

        socket =
          socket
          |> assign(:sqs_polling_enabled, new_sqs_polling)
          |> put_flash(
            :info,
            if(new_sqs_polling,
              do: "SQS polling enabled",
              else: "SQS polling disabled"
            )
          )

        {:noreply, socket}

      {:error, _changeset} ->
        socket = put_flash(socket, :error, "Failed to update SQS polling setting")
        {:noreply, socket}
    end
  end

  def handle_event("update_email_retention", params, socket) do
    # Handle both parameter structures: %{"retention_days" => value} and %{"value" => value}
    value = Map.get(params, "retention_days") || Map.get(params, "value")

    case Integer.parse(value) do
      {retention_days, _} when retention_days > 0 and retention_days <= 365 ->
        case Emails.set_retention_days(retention_days) do
          {:ok, _setting} ->
            socket =
              socket
              |> assign(:email_retention_days, retention_days)
              |> put_flash(:info, "Email retention period updated to #{retention_days} days")

            {:noreply, socket}

          {:error, _changeset} ->
            socket = put_flash(socket, :error, "Failed to update email retention period")
            {:noreply, socket}
        end

      _ ->
        socket = put_flash(socket, :error, "Please enter a valid number between 1 and 365")
        {:noreply, socket}
    end
  end

  def handle_event("update_compress_days", params, socket) do
    # Handle both parameter structures: %{"compress_days" => value} and %{"value" => value}
    value = Map.get(params, "compress_days") || Map.get(params, "value")

    # Set updating state for visual feedback
    socket = assign(socket, :updating_compress_days, true)

    case Integer.parse(value) do
      {compress_days, _} when compress_days >= 7 and compress_days <= 365 ->
        case Emails.set_compress_after_days(compress_days) do
          {:ok, _setting} ->
            socket =
              socket
              |> assign(:email_compress_body, compress_days)
              |> assign(:updating_compress_days, false)
              |> put_flash(:info, "✅ Compression setting updated to #{compress_days} days")

            {:noreply, socket}

          {:error, _changeset} ->
            socket =
              socket
              |> assign(:updating_compress_days, false)
              |> put_flash(:error, "❌ Failed to update compression days")

            {:noreply, socket}
        end

      _ ->
        socket =
          socket
          |> assign(:updating_compress_days, false)
          |> put_flash(:error, "⚠️ Please enter a valid number between 7 and 365")

        {:noreply, socket}
    end
  end

  def handle_event("set_compress_days_focused", _params, socket) do
    # Track when user focuses on compression input
    socket = assign(socket, :compress_days_focused, true)
    {:noreply, socket}
  end

  def handle_event("set_compress_days_changed", _params, socket) do
    # Track when user changes compression input value
    socket = assign(socket, :compress_days_changed, true)
    {:noreply, socket}
  end

  def handle_event("toggle_s3_archival", _params, socket) do
    new_s3_archival = !socket.assigns.email_archive_to_s3

    result = Emails.set_s3_archival(new_s3_archival)

    case result do
      {:ok, _setting} ->
        socket =
          socket
          |> assign(:email_archive_to_s3, new_s3_archival)
          |> put_flash(
            :info,
            if(new_s3_archival,
              do: "S3 archival enabled",
              else: "S3 archival disabled"
            )
          )

        {:noreply, socket}

      {:error, _changeset} ->
        socket = put_flash(socket, :error, "Failed to update S3 archival setting")
        {:noreply, socket}
    end
  end

  def handle_event("update_max_messages", params, socket) do
    # Handle both parameter structures: %{"max_messages" => value} and %{"value" => value}
    value = Map.get(params, "max_messages") || Map.get(params, "value")

    case Integer.parse(value) do
      {max_messages, _} when max_messages >= 1 and max_messages <= 10 ->
        case Emails.set_sqs_max_messages(max_messages) do
          {:ok, _setting} ->
            socket =
              socket
              |> assign(:sqs_max_messages_per_poll, max_messages)
              |> put_flash(:info, "SQS max messages updated to #{max_messages}")

            {:noreply, socket}

          {:error, _changeset} ->
            socket = put_flash(socket, :error, "Failed to update SQS max messages")
            {:noreply, socket}
        end

      _ ->
        socket = put_flash(socket, :error, "Please enter a valid number between 1 and 10")
        {:noreply, socket}
    end
  end

  def handle_event("update_visibility_timeout", params, socket) do
    # Handle both parameter structures: %{"timeout" => value} and %{"value" => value}
    value = Map.get(params, "timeout") || Map.get(params, "value")

    case Integer.parse(value) do
      {timeout, _} when timeout >= 30 and timeout <= 43_200 ->
        case Emails.set_sqs_visibility_timeout(timeout) do
          {:ok, _setting} ->
            socket =
              socket
              |> assign(:sqs_visibility_timeout, timeout)
              |> put_flash(:info, "SQS visibility timeout updated to #{timeout} seconds")

            {:noreply, socket}

          {:error, _changeset} ->
            socket = put_flash(socket, :error, "Failed to update SQS visibility timeout")
            {:noreply, socket}
        end

      _ ->
        socket =
          put_flash(socket, :error, "Please enter a valid number between 30 and 43200 seconds")

        {:noreply, socket}
    end
  end

  def handle_event("setup_aws_infrastructure", _params, socket) do
    # Start AWS infrastructure setup process
    socket = assign(socket, :setting_up_aws, true)

    # Get project name from settings
    project_name =
      Settings.get_setting("project_title", "myapp")
      |> String.downcase()
      |> String.replace(~r/[^a-z0-9-]/, "-")
      |> String.trim("-")

    # Get AWS credentials from current settings
    aws_config = socket.assigns.aws_settings
    region = aws_config.region || AWS.region()

    # Check if credentials are configured
    access_key_id =
      if aws_config.access_key_id != "", do: aws_config.access_key_id, else: nil

    secret_access_key =
      if aws_config.secret_access_key != "", do: aws_config.secret_access_key, else: nil

    if access_key_id && secret_access_key do
      # Run AWS infrastructure setup
      case InfrastructureSetup.run(
             project_name: project_name,
             region: region,
             access_key_id: access_key_id,
             secret_access_key: secret_access_key
           ) do
        {:ok, config} ->
          # Update settings with created infrastructure details
          case Settings.update_settings_batch(config) do
            {:ok, _results} ->
              # Reload AWS settings
              new_aws_settings = %{
                access_key_id: access_key_id,
                secret_access_key: secret_access_key,
                region: config["aws_region"],
                sqs_queue_url: config["aws_sqs_queue_url"],
                sqs_dlq_url: config["aws_sqs_dlq_url"],
                sqs_queue_arn: config["aws_sqs_queue_arn"],
                sns_topic_arn: config["aws_sns_topic_arn"],
                ses_configuration_set: config["aws_ses_configuration_set"],
                sqs_polling_interval_ms: config["sqs_polling_interval_ms"]
              }

              socket =
                socket
                |> assign(:aws_settings, new_aws_settings)
                |> assign(:setting_up_aws, false)
                |> put_flash(:info, """
                ✅ AWS Email Infrastructure Created Successfully!

                📦 Created Resources:
                • Project: #{project_name}
                • Region: #{config["aws_region"]}
                • SNS Topic: #{config["aws_sns_topic_arn"]}
                • SQS Queue: #{config["aws_sqs_queue_url"]}
                • Dead Letter Queue: #{config["aws_sqs_dlq_url"]}
                • SES Configuration Set: #{config["aws_ses_configuration_set"]}

                🎉 All settings have been automatically filled below.
                Click "Save AWS Settings" to persist the configuration.

                ⚡ Next steps:
                1. Verify your email/domain in AWS SES Console
                2. Enable SQS Polling below
                3. Start sending emails!
                """)

              {:noreply, socket}

            {:error, _failed_operation, _failed_value, _changes} ->
              socket =
                socket
                |> assign(:setting_up_aws, false)
                |> put_flash(:error, """
                ⚠️ Infrastructure created but failed to save settings.

                AWS resources were created successfully, but there was an error saving configuration to database.
                Please save AWS settings manually.
                """)

              {:noreply, socket}
          end

        {:error, step, reason} ->
          socket =
            socket
            |> assign(:setting_up_aws, false)
            |> put_flash(:error, """
            ❌ AWS Setup Failed

            Failed at step: #{step}
            Reason: #{reason}

            Please check:
            • AWS credentials are valid
            • IAM permissions (SQS, SNS, SES, STS)
            • AWS region is correct
            • No resource limits exceeded

            You can also use the manual bash script:
            ./scripts/setup_aws_email_infrastructure.sh
            """)

          {:noreply, socket}
      end
    else
      socket =
        socket
        |> assign(:setting_up_aws, false)
        |> put_flash(:error, """
        ❌ AWS Credentials Required

        Please configure AWS Access Key ID and Secret Access Key before running setup.

        You can get these credentials from AWS IAM Console:
        https://console.aws.amazon.com/iam/home#/users
        """)

      {:noreply, socket}
    end
  end

  def handle_event("save_aws_settings", %{"aws_settings" => aws_params}, socket) do
    socket = assign(socket, :saving, true)

    # Prepare all settings for batch update
    settings_to_update = %{
      "aws_access_key_id" => aws_params["access_key_id"] || "",
      "aws_secret_access_key" => aws_params["secret_access_key"] || "",
      "aws_region" =>
        if(aws_params["region"] in [nil, ""],
          do: AWS.region(),
          else: aws_params["region"]
        ),
      "aws_sqs_queue_url" => aws_params["sqs_queue_url"] || "",
      "aws_sqs_dlq_url" => aws_params["sqs_dlq_url"] || "",
      "aws_sqs_queue_arn" => aws_params["sqs_queue_arn"] || "",
      "aws_sns_topic_arn" => aws_params["sns_topic_arn"] || "",
      "aws_ses_configuration_set" =>
        if(aws_params["ses_configuration_set"] in [nil, ""],
          do: "phoenixkit-tracking",
          else: aws_params["ses_configuration_set"]
        ),
      "sqs_polling_interval_ms" =>
        if(aws_params["sqs_polling_interval_ms"] in [nil, ""],
          do: "5000",
          else: aws_params["sqs_polling_interval_ms"]
        )
    }

    # Update all settings in a single transaction
    case Settings.update_settings_batch(settings_to_update) do
      {:ok, _results} ->
        new_aws_settings = build_aws_settings_map(aws_params)

        socket =
          socket
          |> assign(:aws_settings, new_aws_settings)
          |> assign(:saving, false)
          |> put_flash(:info, "AWS settings saved successfully")

        {:noreply, socket}

      {:error, _failed_operation, _failed_value, _changes} ->
        socket =
          socket
          |> assign(:saving, false)
          |> put_flash(:error, "Failed to save AWS settings")

        {:noreply, socket}
    end
  end

  def handle_event("save_sender_settings", %{"sender" => sender_params}, socket) do
    socket = assign(socket, :saving_sender, true)

    settings_to_update = %{
      "from_email" => sender_params["from_email"] || "noreply@localhost",
      "from_name" => sender_params["from_name"] || PhoenixKit.Config.get(:from_name, "PhoenixKit")
    }

    case Settings.update_settings_batch(settings_to_update) do
      {:ok, _results} ->
        new_sender_settings = %{
          from_email: sender_params["from_email"],
          from_name: sender_params["from_name"]
        }

        socket =
          socket
          |> assign(:sender_settings, new_sender_settings)
          |> assign(:saving_sender, false)
          |> put_flash(:info, "Sender settings saved successfully")

        {:noreply, socket}

      {:error, _failed_operation, _failed_value, _changes} ->
        socket =
          socket
          |> assign(:saving_sender, false)
          |> put_flash(:error, "Failed to save sender settings")

        {:noreply, socket}
    end
  end

  def handle_event("verify_aws_credentials", _params, socket) do
    aws_settings = socket.assigns.aws_settings

    # Check if we have the required credentials
    if credentials_missing?(aws_settings) do
      {:noreply,
       assign_verification_error(
         socket,
         "Please enter Access Key ID and Secret Access Key before verification."
       )}
    else
      # Start verification
      socket = assign(socket, :verifying_credentials, true)

      # Run verification in a task to avoid blocking the LiveView
      task = Task.async(fn -> verify_aws_credentials(aws_settings) end)

      case Task.yield(task, 15_000) || Task.shutdown(task) do
        {:ok, result} ->
          {:noreply, handle_verification_result(socket, result)}

        nil ->
          {:noreply,
           assign_verification_error(socket, "❌ Verification timed out. Please try again.")}
      end
    end
  end

  # Handle region selection from direct call (e.g., JS pushEvent)
  def handle_event("select_region", %{"region" => region}, socket) do
    socket =
      socket
      |> assign(:selected_region, region)
      |> assign(:aws_settings, %{socket.assigns.aws_settings | region: region})

    {:noreply, socket}
  end

  # Handle region selection from form input (nested parameter structure)
  def handle_event("select_region", %{"aws_settings" => %{"region" => region}}, socket) do
    socket =
      socket
      |> assign(:selected_region, region)
      |> assign(:aws_settings, %{socket.assigns.aws_settings | region: region})

    {:noreply, socket}
  end

  def handle_event("fetch_available_regions", _params, socket) do
    aws_settings = socket.assigns.aws_settings

    # Get regions in a task
    task =
      Task.async(fn ->
        CredentialsVerifier.get_available_regions(
          aws_settings.access_key_id,
          aws_settings.secret_access_key,
          aws_settings.region
        )
      end)

    case Task.yield(task, 10_000) || Task.shutdown(task) do
      {:ok, {:ok, regions}} ->
        socket =
          socket
          |> assign(:available_regions, regions)
          |> assign(:regions_loaded, true)
          |> assign(:selected_region, aws_settings.region)

        {:noreply, socket}

      {:ok, {:error, reason}} ->
        socket =
          socket
          |> assign(:regions_loaded, false)
          |> put_flash(:error, "Failed to load regions: #{reason}")

        {:noreply, socket}

      nil ->
        socket =
          socket
          |> assign(:regions_loaded, false)
          |> put_flash(:error, "Region loading timed out.")

        {:noreply, socket}
    end
  end

  def handle_event("run_cleanup_now", _params, socket) do
    # Run cleanup operation for emails older than retention period
    socket = assign(socket, :running_cleanup, true)

    retention_days = socket.assigns.email_retention_days

    # Run cleanup in a Task to avoid blocking the LiveView process
    task =
      Task.async(fn ->
        Emails.cleanup_old_logs(retention_days)
      end)

    # Wait for result with timeout
    case Task.yield(task, 30_000) || Task.shutdown(task) do
      {:ok, {deleted_count, _}} ->
        socket =
          socket
          |> assign(:running_cleanup, false)
          |> put_flash(
            :info,
            "✅ Cleanup completed successfully! Deleted #{deleted_count} old email logs (older than #{retention_days} days)."
          )

        {:noreply, socket}

      nil ->
        socket =
          socket
          |> assign(:running_cleanup, false)
          |> put_flash(
            :error,
            "⚠️ Cleanup operation timed out. Please try again or run it manually via mix task."
          )

        {:noreply, socket}

      _error ->
        socket =
          socket
          |> assign(:running_cleanup, false)
          |> put_flash(:error, "❌ Failed to run cleanup. Please check logs for details.")

        {:noreply, socket}
    end
  end

  def handle_event("run_compression_now", _params, socket) do
    # Run compression for email bodies older than compress_days
    socket = assign(socket, :running_compression, true)

    compress_days = socket.assigns.email_compress_body

    # Run compression in a Task to avoid blocking
    task =
      Task.async(fn ->
        Emails.compress_old_bodies(compress_days)
      end)

    # Wait for result with timeout
    case Task.yield(task, 60_000) || Task.shutdown(task) do
      {:ok, {compressed_count, bytes_saved}} ->
        # Handle case where bytes_saved might be nil (current implementation)
        compression_message =
          if is_number(bytes_saved) do
            size_mb = Float.round(bytes_saved / 1024 / 1024, 2)

            "✅ Compression completed! Compressed #{compressed_count} email bodies, saved ~#{size_mb} MB of storage."
          else
            "✅ Compression completed! Compressed #{compressed_count} email bodies and freed up storage space."
          end

        socket =
          socket
          |> assign(:running_compression, false)
          |> put_flash(:info, compression_message)

        {:noreply, socket}

      nil ->
        socket =
          socket
          |> assign(:running_compression, false)
          |> put_flash(
            :error,
            "⚠️ Compression operation timed out. Please try again or run it manually via mix task."
          )

        {:noreply, socket}

      _error ->
        socket =
          socket
          |> assign(:running_compression, false)
          |> put_flash(:error, "❌ Failed to run compression. Please check logs for details.")

        {:noreply, socket}
    end
  end

  def handle_event("run_s3_archival_now", _params, socket) do
    # Run S3 archival for emails older than retention period
    if socket.assigns.email_archive_to_s3 do
      socket = assign(socket, :running_archival, true)

      retention_days = socket.assigns.email_retention_days

      # Run archival in a Task to avoid blocking
      task =
        Task.async(fn ->
          Emails.archive_to_s3(retention_days)
        end)

      # Wait for result with longer timeout (S3 operations can take time)
      case Task.yield(task, 120_000) || Task.shutdown(task) do
        {:ok, {:ok, archived_count: count}} ->
          socket =
            socket
            |> assign(:running_archival, false)
            |> put_flash(
              :info,
              "✅ S3 archival completed successfully! Archived #{count} email logs to S3."
            )

          {:noreply, socket}

        {:ok, {:ok, :skipped}} ->
          socket =
            socket
            |> assign(:running_archival, false)
            |> put_flash(:info, "ℹ️ No emails to archive at this time.")

          {:noreply, socket}

        {:ok, {:error, :s3_not_configured}} ->
          socket =
            socket
            |> assign(:running_archival, false)
            |> put_flash(
              :error,
              "❌ S3 is not configured. Please configure AWS S3 bucket settings first."
            )

          {:noreply, socket}

        {:ok, {:error, :no_bucket_configured}} ->
          socket =
            socket
            |> assign(:running_archival, false)
            |> put_flash(
              :error,
              "❌ S3 bucket not configured. Please set 'email_s3_bucket' setting."
            )

          {:noreply, socket}

        {:ok, {:error, reason}} ->
          socket =
            socket
            |> assign(:running_archival, false)
            |> put_flash(:error, "❌ S3 archival failed: #{inspect(reason)}")

          {:noreply, socket}

        nil ->
          socket =
            socket
            |> assign(:running_archival, false)
            |> put_flash(
              :error,
              "⚠️ S3 archival timed out. Large archives may take longer. Check logs for progress."
            )

          {:noreply, socket}

        _error ->
          socket =
            socket
            |> assign(:running_archival, false)
            |> put_flash(:error, "❌ Failed to run S3 archival. Please check logs for details.")

          {:noreply, socket}
      end
    else
      socket =
        put_flash(socket, :error, "❌ S3 archival is disabled. Please enable it first.")

      {:noreply, socket}
    end
  end

  # Private helpers for AWS credentials verification

  defp credentials_missing?(aws_settings) do
    String.trim(aws_settings.access_key_id) == "" or
      String.trim(aws_settings.secret_access_key) == ""
  end

  defp verify_aws_credentials(aws_settings) do
    # Verify credentials only (STS GetCallerIdentity)
    # Actual permissions will be verified during "Setup AWS Infrastructure"
    CredentialsVerifier.verify_credentials(
      aws_settings.access_key_id,
      aws_settings.secret_access_key,
      aws_settings.region
    )
  end

  defp assign_verification_error(socket, message) do
    socket
    |> assign(:verifying_credentials, false)
    |> assign(:credential_verification_status, :error)
    |> assign(:credential_verification_message, message)
  end

  defp handle_verification_result(socket, {:ok, credential_info}) do
    socket
    |> assign(:verifying_credentials, false)
    |> assign(:credential_verification_status, :success)
    |> assign(
      :credential_verification_message,
      "✅ Credentials verified! Account: #{credential_info.account_id}. Ready for Setup AWS Infrastructure."
    )
    |> assign(:aws_permissions, %{})
  end

  defp handle_verification_result(socket, {:error, :invalid_credentials, message}) do
    assign_verification_error(socket, "❌ Invalid credentials: #{message}")
  end

  defp handle_verification_result(socket, {:error, :authentication_failed, message}) do
    assign_verification_error(socket, "❌ Authentication failed: #{message}")
  end

  defp handle_verification_result(socket, {:error, :configuration_error, message}) do
    assign_verification_error(socket, "❌ Configuration error: #{message}")
  end

  defp handle_verification_result(socket, {:error, :rate_limited, message}) do
    assign_verification_error(socket, "❌ Rate limited: #{message}")
  end

  defp handle_verification_result(socket, {:error, :network_error, message}) do
    assign_verification_error(socket, "❌ Network error: #{message}")
  end

  defp handle_verification_result(socket, {:error, :response_error, message}) do
    assign_verification_error(socket, "❌ Response parsing error: #{message}")
  end

  defp handle_verification_result(socket, {:error, reason}) do
    assign_verification_error(socket, "❌ Verification failed: #{reason}")
  end

  # Auto-load AWS regions when SES events are enabled
  defp maybe_auto_load_regions(socket, false), do: socket

  defp maybe_auto_load_regions(socket, true) do
    aws_settings = socket.assigns.aws_settings

    # Only load if credentials are present
    if aws_settings.access_key_id != "" and aws_settings.secret_access_key != "" do
      load_regions_async(socket, aws_settings)
    else
      socket
    end
  end

  defp load_regions_async(socket, aws_settings) do
    task =
      Task.async(fn ->
        CredentialsVerifier.get_available_regions(
          aws_settings.access_key_id,
          aws_settings.secret_access_key,
          aws_settings.region
        )
      end)

    case Task.yield(task, 10_000) || Task.shutdown(task) do
      {:ok, {:ok, regions}} ->
        socket
        |> assign(:available_regions, regions)
        |> assign(:regions_loaded, true)

      _ ->
        # Silently fail - user can manually refresh regions
        socket
    end
  end

  defp get_current_path(_socket, _session) do
    # For Email settings page
    Routes.path("/admin/settings/emails")
  end

  # Build AWS settings map from params
  defp build_aws_settings_map(aws_params) do
    %{
      access_key_id: aws_params["access_key_id"] || "",
      secret_access_key: aws_params["secret_access_key"] || "",
      region: aws_params["region"] || "",
      sqs_queue_url: aws_params["sqs_queue_url"] || "",
      sqs_dlq_url: aws_params["sqs_dlq_url"] || "",
      sqs_queue_arn: aws_params["sqs_queue_arn"] || "",
      sns_topic_arn: aws_params["sns_topic_arn"] || "",
      ses_configuration_set: aws_params["ses_configuration_set"] || "",
      sqs_polling_interval_ms: aws_params["sqs_polling_interval_ms"] || "5000"
    }
  end
end