# CHANGELOG

All notable changes to this project will be documented in this file.

The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

## [unreleased]

### added

- [ ] Pfx.range(prefix) -> "first - last"

## [v0.14.2] - 2024-10-21

### fixed

- Thanks to elfenlaid: Fix Elixir 1.17 compilation warnings #1
  charlists should be specified using the `~c` sigil, using single quotes has
  been depracated.


## [v0.14.1] - 2022-02-20

### fixed

- in mix.exs, list `:inets` and `:xmerl` as extra application for all modes
- mix iana.specials should write to Pfx's priv/specials, not that of parent
  project that has Pfx as a dependency.



## [v0.14.0] - 2022-02-19

### added

- mix task to update the local snapshot of the IANA IPv4/6 special registries
    - `mix iana.specials` will update the local registry (if needed)

### changed

- formatting an IPv6 prefix now uses '::' where appropiate
- Iana special registry entries now include `:termination` date as well
    - which is usually `:na` and sometimes "yyyy-mm"


## [v0.13.0] - 2022-01-23

### added

- `Pfx.invert/1`, as a proxy for `Pfx.bnot/1`, whose name is somewhat more obscure
    - has a note saying that using `bnot` directly, actually saves a function call

### changed

- `Pfx.compare/2`, now compares prefixes of mixed types as well (using the maxlen property)
- `Pfx.format/2`, when given a `:unit` of `0` it reverts to the prefix's `maxlen`

### fixed

- `Pfx.minimize/1`
    - yields results in the same fashion as the first prefix in the list
    - needed an pre-sort based on 'first-address' and then on `bit_size` in
      order to really minimize a list of prefixes


## [v0.12.0] - 2022-01-16

### added

- `Pfx.sigil_p/2`, so `~p"1.1.1.0/24"` yields `%Pfx{bits: <<1, 1, 1>>, maxlen: 32}`
    - modifiers to get address, mask, first, last, neighbor, parent or trimmed result instead
    - additional modifiers to invert the result and/or turn it into a string or tuple format.
- `Pfx.sigil_p/3`, which allows for piping into `~p()`
- `Pfx.iana_special/2`, returns properties for a prefix, based on iana's special IPv4/6 registries.

### changed

- `Pfx.address/1` now properly returns a full address  prefix, always without mask
    - example: address({{1, 1, 1, 1}, 24}) -> {1, 1, 1, 1}


## [v0.11.0] - 2022-01-11

### fixed

- `Pfx.contrast/2` 1.1.1.0/24 is left-adjacent to 1.1.2.0/25, not disjoint!
    - added `:left_nc` and `:right_nc` => left/right adjacent and but not combinable
    - added `:incompatible` for when two prefixes have different maxlen's (not raise ArgumentError)
    - added `:einvalid` if one of the prefixes is invalid (not raise ArgumentError)

### added

- `Pfx.minimize/1`, minimizes a list of prefixes while covering the same address range(s).
    - prefixes are grouped and minimized per maxlen property


## [v0.10.1] - 2022-01-09

### fixed

- `Pfx.member/3`, check `width` argument for validity and raise ArgumentError if invalid
- fixed the Enumerable.Pfx.slice/1 implementation, so Enum.take & friends work properly

## [v0.10.0] - 2021-12-29

### added

- `Pfx.partition_range/2` which returns a list of prefixes, where range is given by:
    - a start prefix and a stop prefix, or
    - a start prefix and a number of hosts
- `Pfx.to_tuple/2` to convert (with options) a prefix into an address-tuple
    - option `:mask`, default true, applies the mask and yields an address,length-tuple
    - option `:width` default 8 (or 16 in case maxlen is 128)
    - the width option allows for converting prefixes other than ipv4/6, eui48/64 as well


## [v0.9.0] - 2021-12-03

### added

- `Pfx.address/1`, returns the address portion of given prefix without applying a mask.
- `Pfx.type/1` which returns either :ip4, :ip6, :eui48, :eui64 or the prefix.maxlen property

### fixed

- typespec for Pfx.new now includes Pfx.t as argument as well
- typespec for some others too


## [v0.8.0] - 2021-11-15

### added
- tests for `Pfx.pfxlen/1`
- added `Pfx.parse/1`
- added `Pfx.parse/2`

### changed

- type spec for `t:Pfx.prefix/t` now uses `t` instead of `Pfx.t()`

## [v0.7.0] - 2021-07-27

### added
- `Pfx.pfxlen/1` returns the number of bits in the prefix

### changed
- `Pfx.mask/2` now takes 2 options (inv_mask and trim) and trims result by default

## [v0.6.0] - 2021-07-22

### added
- `Pfx.trim/1` trims _all_ trailing zero's from given prefix
- `Pfx.mask/2` applies mask to prefix (changing its prefix.bits string)

## [v0.5.0] - 2021-07-17

### changed
- "Pfx.multicast/1"  renamed to `Pfx.multicast_decode/1` and updated decoding
- `Pfx.eui64_encode/1` now also accepts EUI-64 (only needs to flip 7th bit)

### added
- added `Pfx.first/1` as a more generic version of `Pfx.network/1`
- added `Pfx.last/1` as a more generic version of `Pfx.broadcast/1`
- added `Pfx.from_hex/1` to create a `t:Pfx.t/0` from any hex string


## [v0.4.0] - 2021-07-10

### added
- `Pfx.eui64_encode/1`, which creates a modified EUI-64 from a EUI-48 address
- `Pfx.eui64_decode/1`, which reverses a modified EUI-64 to an EUI-48 address
- `Pfx.flip/2`, which flips a single bit in bitstring
- `Pfx.insert/3`, which inserts some bits into bitstring
- `Pfx.remove/3`, which removes some bits from bitstring

### changed
- `Pfx.new/1` and `Pfx.from_mac/1` also parse EUI-64 in Cisco's dot format
- `Pfx.teredo_decode/1` mirrors the representation for server/client to its pfx argument
- functions raise their own exceptions when marshalling (instead of leaving that up to `Pfx.new/1`)

## [v0.3.0] - 2021-07-08

### added
- `Pfx.keep/2` to keep some msb bits
- `String.Chars` for MAC addresses with maxlen 64 (w/ hyphens)
- `Pfx.from_mac/1` to support EUI-64 with ":"'s

### changed
- `Pfx.new/1` now parses EUI-48 as well
- `Pfx.new/1` now parses EUI-64 as well, unless using ':' for punctuation
- `String.Chars` for MAC addresses with maxlen 48 uses hyphens
- `String.Chars` no longer accepts invalid `t:Pfx.t/0` structs
- `Pfx.format/2` without `opts`, uses same defaults as `String.Chars`

## [v0.2.1] - 2021-07-04

### added
- `Pfx.marshall/2` is now a public function

### changed
- renamed `Pfx.teredo` to `Pfx.teredo_decode/1`

## [v0.2.0] - 2021-07-03

### added
- `Pfx.teredo_encode/4`
- `Pfx.drop/2`, which drops some lsb bits
- improved documentation

## [v0.1.1] - 2021-07-03

### changed
- `Pfx.band/2`, result has same number of bits as its first argument
- `Pfx.bor/2`, result has same number of bits as its first argument
- `Pfx.bxor/2`, result has same number of bits as its first argument
- IPv6 addresses in lowercase

### fixed
- `Pfx.brot/2`, won't choke on rotating empty `pfx.bits`
- `Pfx.contrast/2`, 1.2.3.0/24 is really to the left of 1.2.4.0/24

## [v0.1.0] - 2021-06-28
- initial version