# Firmware configuration file for the Giant Board

require-fwup-version="1.0.0"

include("${NERVES_SDK_IMAGES:-.}/fwup_include/fwup-common.conf")

# File resources are listed in the order that they are included in the .fw file
# This is important, since this is the order that they're written on a firmware
# update due to the event driven nature of the update system.
file-resource boot.bin {
    host-path = "${NERVES_SDK_IMAGES}/boot.bin"
}
file-resource u-boot.bin {
    host-path = "${NERVES_SDK_IMAGES}/u-boot.bin"
}
file-resource uboot-env.bin {
    host-path = "${NERVES_SDK_IMAGES}/uboot-env.bin"
}
file-resource rootfs.img {
    host-path = ${ROOTFS}

    # Error out if the rootfs size exceeds the partition size
    assert-size-lte = ${ROOTFS_A_PART_COUNT}
}

mbr mbr {
    bootstrap-code-host-path = "${NERVES_SDK_IMAGES}/sama5d2-sdcardboot-uboot-4.0.5.bin"
    partition 0 {
        block-offset = ${BOOT_PART_OFFSET}
        block-count = ${BOOT_PART_COUNT}
        type = 0xc # FAT32
        boot = true
    }
    partition 1 {
        block-offset = ${ROOTFS_A_PART_OFFSET}
        block-count = ${ROOTFS_A_PART_COUNT}
        type = 0x83 # Linux
    }
    partition 2 {
        block-offset = ${ROOTFS_B_PART_OFFSET}
        block-count = ${ROOTFS_B_PART_COUNT}
        type = 0x83 # Linux
    }
    partition 3 {
        block-offset = ${APP_PART_OFFSET}
        block-count = ${APP_PART_COUNT}
        type = 0x83 # Linux
        expand = true
    }
}

# This firmware task writes everything to the destination media
task complete {
    # Only match if not mounted
    require-unmounted-destination = true

    on-init {
        mbr_write(mbr)

        fat_mkfs(${BOOT_PART_OFFSET}, ${BOOT_PART_COUNT})
        fat_setlabel(${BOOT_PART_OFFSET}, "BOOT")
    }

    on-resource boot.bin { fat_write(${BOOT_PART_OFFSET}, "boot.bin") }
    on-resource u-boot.bin { fat_write(${BOOT_PART_OFFSET}, "u-boot.bin") }

    on-resource uboot-env.bin {
        # Boot to the A partition first and don't fail back.
        # If this fails, we bricked the board with no recovery.
        raw_write(${UBOOT_ENV_OFFSET})

        # Include provisioning instructions
        include("${NERVES_PROVISIONING}")

        # Add in the generic Nerves metadata variables.
        uboot_setenv(uboot-env, "nerves_fw_active", "a")
        uboot_setenv(uboot-env, "nerves_fw_devpath", ${NERVES_FW_DEVPATH})
        uboot_setenv(uboot-env, "a.nerves_fw_application_part0_devpath", ${NERVES_FW_APPLICATION_PART0_DEVPATH})
        uboot_setenv(uboot-env, "a.nerves_fw_application_part0_fstype", ${NERVES_FW_APPLICATION_PART0_FSTYPE})
        uboot_setenv(uboot-env, "a.nerves_fw_application_part0_target", ${NERVES_FW_APPLICATION_PART0_TARGET})
        uboot_setenv(uboot-env, "a.nerves_fw_product", ${NERVES_FW_PRODUCT})
        uboot_setenv(uboot-env, "a.nerves_fw_description", ${NERVES_FW_DESCRIPTION})
        uboot_setenv(uboot-env, "a.nerves_fw_version", ${NERVES_FW_VERSION})
        uboot_setenv(uboot-env, "a.nerves_fw_platform", ${NERVES_FW_PLATFORM})
        uboot_setenv(uboot-env, "a.nerves_fw_architecture", ${NERVES_FW_ARCHITECTURE})
        uboot_setenv(uboot-env, "a.nerves_fw_author", ${NERVES_FW_AUTHOR})
        uboot_setenv(uboot-env, "a.nerves_fw_vcs_identifier", ${NERVES_FW_VCS_IDENTIFIER})
        uboot_setenv(uboot-env, "a.nerves_fw_misc", ${NERVES_FW_MISC})
        uboot_setenv(uboot-env, "a.nerves_fw_uuid", "\${FWUP_META_UUID}")
    }
    on-resource rootfs.img {
        # write to the first rootfs partition
        raw_write(${ROOTFS_A_PART_OFFSET})
    }

    on-finish {
        # Clear out any old data in the B partition that might be mistaken for
        # a file system. This is mostly to avoid confusion in humans when
        # reprogramming SDCards with unknown contents.
        raw_memset(${ROOTFS_B_PART_OFFSET}, 256, 0xff)

        # Invalidate the application data partition so that it is guaranteed to
        # trigger the corrupt filesystem detection code on first boot and get
        # formatted. If this isn't done and an old SDCard is reused, the
        # application data could be in a weird state.
        raw_memset(${APP_PART_OFFSET}, 256, 0xff)
    }
}

task upgrade.a {
    # This task upgrades the A partition
    require-uboot-variable(uboot-env, "nerves_fw_active", "b")

    # Require that the running version of firmware has been validated.
    # If it has not, then failing back is not guaranteed to work.
    require-uboot-variable(uboot-env, "nerves_fw_validated", "1")

    # Verify the expected platform/architecture
    require-uboot-variable(uboot-env, "b.nerves_fw_platform", "${NERVES_FW_PLATFORM}")
    require-uboot-variable(uboot-env, "b.nerves_fw_architecture", "${NERVES_FW_ARCHITECTURE}")

    on-init {
        info("Upgrading partition A")

        # Clear some firmware information just in case this update gets
        # interrupted midway.
        uboot_unsetenv(uboot-env, "a.nerves_fw_version")
        uboot_unsetenv(uboot-env, "a.nerves_fw_platform")
        uboot_unsetenv(uboot-env, "a.nerves_fw_architecture")
        uboot_unsetenv(uboot-env, "a.nerves_fw_uuid")

        # Indicate that the entire partition can be cleared
        trim(${ROOTFS_A_PART_OFFSET}, ${ROOTFS_A_PART_COUNT})
    }

    on-resource rootfs.img { raw_write(${ROOTFS_A_PART_OFFSET}) }

    on-finish {
        # Update firmware metadata
        uboot_setenv(uboot-env, "a.nerves_fw_application_part0_devpath", ${NERVES_FW_APPLICATION_PART0_DEVPATH})
        uboot_setenv(uboot-env, "a.nerves_fw_application_part0_fstype", ${NERVES_FW_APPLICATION_PART0_FSTYPE})
        uboot_setenv(uboot-env, "a.nerves_fw_application_part0_target", ${NERVES_FW_APPLICATION_PART0_TARGET})
        uboot_setenv(uboot-env, "a.nerves_fw_product", ${NERVES_FW_PRODUCT})
        uboot_setenv(uboot-env, "a.nerves_fw_description", ${NERVES_FW_DESCRIPTION})
        uboot_setenv(uboot-env, "a.nerves_fw_version", ${NERVES_FW_VERSION})
        uboot_setenv(uboot-env, "a.nerves_fw_platform", ${NERVES_FW_PLATFORM})
        uboot_setenv(uboot-env, "a.nerves_fw_architecture", ${NERVES_FW_ARCHITECTURE})
        uboot_setenv(uboot-env, "a.nerves_fw_author", ${NERVES_FW_AUTHOR})
        uboot_setenv(uboot-env, "a.nerves_fw_vcs_identifier", ${NERVES_FW_VCS_IDENTIFIER})
        uboot_setenv(uboot-env, "a.nerves_fw_misc", ${NERVES_FW_MISC})
        uboot_setenv(uboot-env, "a.nerves_fw_uuid", "\${FWUP_META_UUID}")

        # Reset the validation status and boot to A
        # next time.
        uboot_setenv(uboot-env, "nerves_fw_active", "a")
        uboot_setenv(uboot-env, "nerves_fw_validated", "0")
        uboot_setenv(uboot-env, "nerves_fw_booted", "0")
    }

    on-error {
    }
}

task upgrade.b {
    # This task upgrades the B partition
    require-uboot-variable(uboot-env, "nerves_fw_active", "a")
    require-uboot-variable(uboot-env, "nerves_fw_validated", "1")

    # Verify the expected platform/architecture
    require-uboot-variable(uboot-env, "a.nerves_fw_platform", "${NERVES_FW_PLATFORM}")
    require-uboot-variable(uboot-env, "a.nerves_fw_architecture", "${NERVES_FW_ARCHITECTURE}")

    on-init {
        info("Upgrading partition B")

        # Clear some firmware information just in case this update gets
        # interrupted midway.
        uboot_unsetenv(uboot-env, "b.nerves_fw_version")
        uboot_unsetenv(uboot-env, "b.nerves_fw_platform")
        uboot_unsetenv(uboot-env, "b.nerves_fw_architecture")
        uboot_unsetenv(uboot-env, "b.nerves_fw_uuid")

        trim(${ROOTFS_B_PART_OFFSET}, ${ROOTFS_B_PART_COUNT})
    }

    on-resource rootfs.img { raw_write(${ROOTFS_B_PART_OFFSET}) }

    on-finish {
        # Update firmware metadata
        uboot_setenv(uboot-env, "b.nerves_fw_application_part0_devpath", ${NERVES_FW_APPLICATION_PART0_DEVPATH})
        uboot_setenv(uboot-env, "b.nerves_fw_application_part0_fstype", ${NERVES_FW_APPLICATION_PART0_FSTYPE})
        uboot_setenv(uboot-env, "b.nerves_fw_application_part0_target", ${NERVES_FW_APPLICATION_PART0_TARGET})
        uboot_setenv(uboot-env, "b.nerves_fw_product", ${NERVES_FW_PRODUCT})
        uboot_setenv(uboot-env, "b.nerves_fw_description", ${NERVES_FW_DESCRIPTION})
        uboot_setenv(uboot-env, "b.nerves_fw_version", ${NERVES_FW_VERSION})
        uboot_setenv(uboot-env, "b.nerves_fw_platform", ${NERVES_FW_PLATFORM})
        uboot_setenv(uboot-env, "b.nerves_fw_architecture", ${NERVES_FW_ARCHITECTURE})
        uboot_setenv(uboot-env, "b.nerves_fw_author", ${NERVES_FW_AUTHOR})
        uboot_setenv(uboot-env, "b.nerves_fw_vcs_identifier", ${NERVES_FW_VCS_IDENTIFIER})
        uboot_setenv(uboot-env, "b.nerves_fw_misc", ${NERVES_FW_MISC})
        uboot_setenv(uboot-env, "b.nerves_fw_uuid", "\${FWUP_META_UUID}")

        # Reset the validation status and boot to B next time.
        uboot_setenv(uboot-env, "nerves_fw_active", "b")
        uboot_setenv(uboot-env, "nerves_fw_validated", "0")
        uboot_setenv(uboot-env, "nerves_fw_booted", "0")
    }

    on-error {
    }
}

task upgrade.unvalidated {
    require-uboot-variable(uboot-env, "nerves_fw_validated", "0")

    on-init {
        error("Please validate the running firmware before upgrading it again.")
    }
}

task upgrade.unexpected {
    require-uboot-variable(uboot-env, "a.nerves_fw_platform", "${NERVES_FW_PLATFORM}")
    require-uboot-variable(uboot-env, "a.nerves_fw_architecture", "${NERVES_FW_ARCHITECTURE}")
    on-init {
        error("Please check the media being upgraded. It doesn't look like either the A or B partitions are active.")
    }
}

task upgrade.wrongplatform {
    on-init {
        error("Expecting platform=${NERVES_FW_PLATFORM} and architecture=${NERVES_FW_ARCHITECTURE}")
    }
}
