Commands Reference

FerricStore implements 250+ commands covering standard Redis data types, probabilistic structures, and FerricStore-native operations. This guide documents each command with its exact syntax, return values, embedded API equivalent, and Redis compatibility notes.

Redis Compatibility Summary

Fully Compatible Commands

These commands match Redis 7.4 behavior exactly -- same arguments, same return values, same error messages:

GET, SET (EX/PX/EXAT/PXAT/NX/XX/GET/KEEPTTL), DEL, EXISTS, MGET, MSET, MSETNX, INCR, DECR, INCRBY, DECRBY, INCRBYFLOAT, APPEND, STRLEN, GETSET, GETDEL, GETEX, SETNX, SETEX, PSETEX, GETRANGE, SETRANGE, HSET, HGET, HDEL, HMGET, HGETALL, HEXISTS, HKEYS, HVALS, HLEN, HINCRBY, HINCRBYFLOAT, HSETNX, HSTRLEN, HRANDFIELD, HSCAN, HEXPIRE, HTTL, HPERSIST, HPEXPIRE, HPTTL, HEXPIRETIME, HGETDEL, HGETEX, HSETEX, LPUSH, RPUSH, LPOP, RPOP, LRANGE, LLEN, LINDEX, LSET, LREM, LTRIM, LPOS, LINSERT, LMOVE, RPOPLPUSH, LPUSHX, RPUSHX, SADD, SREM, SMEMBERS, SISMEMBER, SMISMEMBER, SCARD, SRANDMEMBER, SPOP, SDIFF, SINTER, SUNION, SDIFFSTORE, SINTERSTORE, SUNIONSTORE, SINTERCARD, SMOVE, SSCAN, ZADD (NX/XX/GT/LT/CH), ZSCORE, ZRANK, ZREVRANK, ZRANGE, ZREVRANGE, ZCARD, ZREM, ZINCRBY, ZCOUNT, ZPOPMIN, ZPOPMAX, ZRANDMEMBER, ZMSCORE, ZRANGEBYSCORE, ZREVRANGEBYSCORE, ZSCAN, XADD, XLEN, XRANGE, XREVRANGE, XREAD (including BLOCK), XTRIM, XDEL, XINFO STREAM, XGROUP CREATE, XREADGROUP, XACK, EXPIRE, PEXPIRE, EXPIREAT, PEXPIREAT, TTL, PTTL, PERSIST, EXPIRETIME, PEXPIRETIME, SETBIT, GETBIT, BITCOUNT, BITPOS, BITOP, PFADD, PFCOUNT, PFMERGE, GEOADD, GEOPOS, GEODIST, GEOHASH, GEOSEARCH, GEOSEARCHSTORE, PING, ECHO, DBSIZE, KEYS, FLUSHDB, FLUSHALL, INFO, TYPE, UNLINK, RENAME, RENAMENX, COPY, RANDOMKEY, OBJECT HELP/REFCOUNT, SCAN, CONFIG GET/SET/RESETSTAT/REWRITE, SLOWLOG GET/LEN/RESET, COMMAND/COMMAND COUNT/COMMAND LIST/COMMAND INFO/COMMAND DOCS/COMMAND GETKEYS, MULTI, EXEC, DISCARD, WATCH, UNWATCH, SUBSCRIBE, UNSUBSCRIBE, PSUBSCRIBE, PUNSUBSCRIBE, PUBLISH, CLIENT ID/SETNAME/GETNAME/INFO/LIST/TRACKING/CACHING/TRACKINGINFO/GETREDIR, HELLO, AUTH, QUIT, RESET

Commands with Minor Differences

Command	Difference
`ZRANGE`	Redis 6.2+ unified syntax (`BYSCORE`/`BYLEX`/`REV`/`LIMIT`) not yet supported -- use `ZRANGEBYSCORE`/`ZREVRANGEBYSCORE` instead
`SCAN`	Cursor is key-based (alphabetic position), not an opaque integer. Functionally equivalent but cursor values differ from Redis
`HSCAN`/`SSCAN`/`ZSCAN`	Cursor is an integer offset into the scanned list. Redis uses a hash-table-based cursor; results are equivalent
`FLUSHDB`/`FLUSHALL`	`ASYNC`/`SYNC` accepted but both execute synchronously; true async reclaim happens during Bitcask merge
`UNLINK`	Semantically identical to `DEL` -- async reclaim is deferred to Bitcask merge
`OBJECT ENCODING`	Returns type-specific encoding (`"embstr"`, `"raw"`, `"hashtable"`, `"quicklist"`, `"skiplist"`, `"stream"`) instead of Redis's internal encodings like `ziplist`/`listpack`/`intset`
`OBJECT FREQ`	Returns the LFU counter from keydir, not Redis's logarithmic frequency
`OBJECT IDLETIME`	Returns idle seconds derived from LFU last-decrement-time, not Redis's LRU clock
`SELECT`	Returns error -- FerricStore is single-database
`INFO`	Returns FerricStore-specific sections (`raft`, `bitcask`, `ferricstore`, `keydir_analysis`, `namespace_config`) in addition to Redis standard sections
`WAIT`	Always returns `0` immediately (no replica acknowledgement)
`BLPOP`/`BRPOP`/`BLMOVE`/`BLMPOP`	Supported in TCP mode only, not in embedded mode
`XREAD BLOCK`	Supported in TCP mode via stream waiters; not available in embedded mode

FerricStore-Only Commands

These have no Redis equivalent:

CAS, LOCK, UNLOCK, EXTEND, RATELIMIT.ADD, FETCH_OR_COMPUTE, FETCH_OR_COMPUTE_RESULT, FETCH_OR_COMPUTE_ERROR, KEY_INFO, FERRICSTORE.CONFIG, FERRICSTORE.METRICS, FERRICSTORE.HOTNESS, FERRICSTORE.KEY_INFO, CLUSTER.HEALTH, CLUSTER.STATS, CLUSTER.KEYSLOT, CLUSTER.SLOTS

Redis Commands NOT Yet Supported

EVAL, EVALSHA, EVALSHA_RO, EVAL_RO (Lua scripting), LMPOP, ZMPOP, BZMPOP (multi-key pop), ZUNIONSTORE, ZINTERSTORE, ZDIFFSTORE (sorted set store operations), ZRANGESTORE, ZRANGEBYLEX, ZREVRANGEBYLEX, ZLEXCOUNT, SORT, SORT_RO, OBJECT extended subcommands (OBJECT PERSIST, OBJECT COPY), CLUSTER (full Redis Cluster protocol), DUMP, RESTORE, MIGRATE, MOVE, CLIENT KILL, CLIENT NO-EVICT, CLIENT PAUSE, CLIENT UNPAUSE, DEBUG (most subcommands)

String Commands

String commands operate on simple key-value pairs. Values are stored as raw byte strings in Bitcask. All writes go through Raft group-commit.

GET

Retrieves the value of a key. Returns a WRONGTYPE error if the key holds a non-string data structure (hash, list, set, zset). FerricStore detects data structure types by peeking at ETF header bytes without deserializing the entire value.


RESP3 syntax	`GET key`
Embedded API	`FerricStore.get(key)`
RESP3 return	Bulk string, or `_` (null) if key does not exist
Elixir return	`{:ok, binary()}` or `{:ok, nil}`
Redis compat	Fully compatible

SET

Sets a string value with optional expiry and conditional flags.


RESP3 syntax	`SET key value [EX seconds \| PX milliseconds \| EXAT unix-sec \| PXAT unix-ms] [NX\|XX] [GET] [KEEPTTL]`
Embedded API	`FerricStore.set(key, value, ttl: ms)`
RESP3 return	`+OK` on success, `_` (null) when NX/XX condition fails. With `GET`: returns old value or null.
Elixir return	`:ok` on success, `{:ok, nil}` when condition fails

Options:

EX seconds -- set expiry in seconds (must be > 0)
PX milliseconds -- set expiry in milliseconds (must be > 0)
EXAT unix-sec -- set absolute expiry as Unix timestamp in seconds
PXAT unix-ms -- set absolute expiry as Unix timestamp in milliseconds
NX -- only set if key does not exist
XX -- only set if key already exists
GET -- return the old value stored at key (or null if key didn't exist)
KEEPTTL -- retain the existing TTL on the key (cannot combine with EX/PX/EXAT/PXAT)

Redis compat: Fully compatible -- all SET options supported.

FerricStore behavior: Expiry is stored as an absolute HLC timestamp (expire_at_ms). Writes go through Raft group-commit -- the ETS keydir is updated immediately (sub-microsecond read visibility) while Bitcask persistence is batched.

DEL

Deletes one or more keys. Handles both plain string keys and compound data structure keys (hash, list, set, zset) by cleaning up all sub-keys and type metadata.


RESP3 syntax	`DEL key [key ...]`
Embedded API	`FerricStore.del(key)`
RESP3 return	Integer -- number of keys deleted
Elixir return	`:ok`
Redis compat	Fully compatible

EXISTS

Returns the count of keys that exist. Checks both plain keys and compound data structure type metadata.


RESP3 syntax	`EXISTS key [key ...]`
Embedded API	`FerricStore.exists(key)`
RESP3 return	Integer -- count of existing keys (a key is counted once for each time it appears in the argument list)
Elixir return	`true` or `false` (single key)
Redis compat	Fully compatible

MGET

Returns values for multiple keys. Returns nil for keys that do not exist.


RESP3 syntax	`MGET key [key ...]`
Embedded API	`FerricStore.mget(keys)`
RESP3 return	Array of bulk strings / nulls
Elixir return	`{:ok, [binary() \| nil]}`
Redis compat	Fully compatible

MSET

Sets multiple key-value pairs atomically. Never fails (always overwrites).


RESP3 syntax	`MSET key value [key value ...]`
Embedded API	`FerricStore.mset(map)`
RESP3 return	`+OK`
Elixir return	`:ok`
Redis compat	Fully compatible

Validation: Rejects empty keys and keys larger than 65,535 bytes.

MSETNX

Sets multiple keys only if NONE of the keys exist. Returns 0 if any key already exists (none are set).


RESP3 syntax	`MSETNX key value [key value ...]`
Embedded API	`FerricStore.msetnx(map)`
RESP3 return	Integer -- `1` (all set) or `0` (none set)
Elixir return	`{:ok, true}` or `{:ok, false}`
Redis compat	Fully compatible

INCR / DECR / INCRBY / DECRBY

Atomically increment or decrement integer values. If the key does not exist, it is initialized to 0 before the operation.


RESP3 syntax	`INCR key`, `DECR key`, `INCRBY key increment`, `DECRBY key decrement`
Embedded API	`FerricStore.incr(key)`, `FerricStore.decr(key)`, `FerricStore.incr_by(key, n)`, `FerricStore.decr_by(key, n)`
RESP3 return	Integer -- the new value
Elixir return	`{:ok, integer()}`
Redis compat	Fully compatible

Error: Returns ERR value is not an integer or out of range if the value is not a valid integer.

INCRBYFLOAT

Atomically increment a value by a floating point amount. If the key does not exist, it is initialized to 0.0. Rejects inf and NaN.


RESP3 syntax	`INCRBYFLOAT key increment`
Embedded API	`FerricStore.incr_by_float(key, delta)`
RESP3 return	Bulk string -- the new value as a string
Elixir return	`{:ok, binary()}`
Redis compat	Fully compatible

APPEND

Appends a value to an existing string. If the key does not exist, it is created with the given value.


RESP3 syntax	`APPEND key value`
Embedded API	`FerricStore.append(key, value)`
RESP3 return	Integer -- the new length in bytes
Elixir return	`{:ok, integer()}`
Redis compat	Fully compatible

STRLEN

Returns the byte length of the string stored at key. Returns 0 if the key does not exist.


RESP3 syntax	`STRLEN key`
Embedded API	`FerricStore.strlen(key)`
RESP3 return	Integer
Elixir return	`{:ok, integer()}`
Redis compat	Fully compatible

GETSET

Atomically sets a key and returns the old value. Deprecated in Redis 6.2+ (use SET ... GET), but still supported.


RESP3 syntax	`GETSET key value`
Embedded API	`FerricStore.getset(key, value)`
RESP3 return	Bulk string (old value) or null
Elixir return	`{:ok, binary() \| nil}`
Redis compat	Fully compatible

GETDEL

Atomically gets and deletes a key.


RESP3 syntax	`GETDEL key`
Embedded API	`FerricStore.getdel(key)`
RESP3 return	Bulk string or null
Elixir return	`{:ok, binary() \| nil}`
Redis compat	Fully compatible

GETEX

Gets a key and optionally updates its TTL.


RESP3 syntax	`GETEX key [EX seconds \| PX ms \| EXAT ts \| PXAT ms_ts \| PERSIST]`
Embedded API	`FerricStore.getex(key, ttl: ms)`
RESP3 return	Bulk string or null
Elixir return	`{:ok, binary() \| nil}`
Redis compat	Fully compatible -- all five TTL options supported

SETNX

Sets a key only if it does not already exist.


RESP3 syntax	`SETNX key value`
Embedded API	`FerricStore.setnx(key, value)`
RESP3 return	Integer -- `1` (set) or `0` (not set)
Elixir return	`{:ok, true}` or `{:ok, false}`
Redis compat	Fully compatible

SETEX / PSETEX

Sets a key with an expiry.


RESP3 syntax	`SETEX key seconds value`, `PSETEX key milliseconds value`
Embedded API	`FerricStore.setex(key, seconds, value)`, `FerricStore.psetex(key, ms, value)`
RESP3 return	`+OK`
Elixir return	`:ok`
Redis compat	Fully compatible. TTL must be > 0.

GETRANGE

Returns a substring of the string value by byte range. Supports negative indices (from end).


RESP3 syntax	`GETRANGE key start end`
Embedded API	`FerricStore.getrange(key, start, stop)`
RESP3 return	Bulk string (empty if key missing or range invalid)
Elixir return	`{:ok, binary()}`
Redis compat	Fully compatible

SETRANGE

Overwrites part of a string starting at the given byte offset. If the key does not exist, creates a zero-padded string.


RESP3 syntax	`SETRANGE key offset value`
Embedded API	`FerricStore.setrange(key, offset, value)`
RESP3 return	Integer -- the new string length
Elixir return	`{:ok, integer()}`
Redis compat	Fully compatible

Hash Commands

Each hash field is stored as an individual compound key in the shared shard Bitcask: H:redis_key\0field_name -> value. This allows individual field access without reading the entire hash. Type metadata is maintained by TypeRegistry -- using a hash command on a key that holds a different type returns WRONGTYPE.

HSET

Sets one or more field-value pairs. Returns the number of NEW fields added (not updated).


RESP3 syntax	`HSET key field value [field value ...]`
Embedded API	`FerricStore.hset(key, map)`
RESP3 return	Integer -- count of new fields added
Elixir return	`:ok`
Redis compat	Fully compatible

HGET

Returns the value of a single field.


RESP3 syntax	`HGET key field`
Embedded API	`FerricStore.hget(key, field)`
RESP3 return	Bulk string or null
Elixir return	`{:ok, binary() \| nil}`
Redis compat	Fully compatible

HDEL

Deletes one or more fields. Cleans up type metadata if the hash becomes empty.


RESP3 syntax	`HDEL key field [field ...]`
Embedded API	`FerricStore.hdel(key, fields)`
RESP3 return	Integer -- count of fields deleted
Elixir return	`{:ok, integer()}`
Redis compat	Fully compatible

HMGET

Returns values for multiple fields. Missing fields return null.


RESP3 syntax	`HMGET key field [field ...]`
Embedded API	`FerricStore.hmget(key, fields)`
RESP3 return	Array of bulk strings / nulls
Elixir return	`{:ok, [binary() \| nil]}`
Redis compat	Fully compatible

HGETALL

Returns all fields and values as a flat list: [field1, value1, field2, value2, ...].


RESP3 syntax	`HGETALL key`
Embedded API	`FerricStore.hgetall(key)`
RESP3 return	Array (flat interleaved) or Map in RESP3
Elixir return	`{:ok, map()}`
Redis compat	Fully compatible

HEXISTS / HLEN / HKEYS / HVALS

Command	Syntax	Return
`HEXISTS`	`HEXISTS key field`	`1` if exists, `0` if not
`HLEN`	`HLEN key`	Integer -- field count
`HKEYS`	`HKEYS key`	Array of field names
`HVALS`	`HVALS key`	Array of values

All return empty results (0, []) for non-existent keys. Redis-compatible.

HINCRBY / HINCRBYFLOAT

Atomically increment hash field values. If the field does not exist, it is initialized to 0.


RESP3 syntax	`HINCRBY key field increment`, `HINCRBYFLOAT key field increment`
Embedded API	`FerricStore.hincrby(key, field, n)`, `FerricStore.hincrbyfloat(key, field, delta)`
RESP3 return	Integer (HINCRBY) or bulk string (HINCRBYFLOAT)
Redis compat	Fully compatible

HSETNX

Sets a field only if it does not exist.


RESP3 syntax	`HSETNX key field value`
RESP3 return	`1` (set) or `0` (not set)
Redis compat	Fully compatible

HSTRLEN

Returns the string length of a hash field value. Returns 0 for missing fields.


RESP3 syntax	`HSTRLEN key field`
RESP3 return	Integer
Redis compat	Fully compatible

HRANDFIELD

Returns random field(s). Negative count allows duplicates.


RESP3 syntax	`HRANDFIELD key [count [WITHVALUES]]`
RESP3 return	Bulk string (single), array (multiple)
Redis compat	Fully compatible. Negative count behavior (repeats allowed) matches Redis.

HSCAN

Cursor-based iteration over hash fields with optional pattern matching.


RESP3 syntax	`HSCAN key cursor [MATCH pattern] [COUNT count]`
RESP3 return	`[next_cursor, [field, value, ...]]`
Redis compat	Cursor is an integer offset, not a Redis-style hash-table cursor. Results are equivalent. Default COUNT is 10.

Hash Field TTL (Redis 7.4+)

FerricStore supports per-field expiry on hash fields:

Command	Syntax	Return
`HEXPIRE`	`HEXPIRE key seconds FIELDS count field [field ...]`	List of `1` (set) / `-2` (field missing)
`HTTL`	`HTTL key FIELDS count field [field ...]`	List of TTL seconds / `-1` (no expiry) / `-2` (missing)
`HPERSIST`	`HPERSIST key FIELDS count field [field ...]`	List of `1` (removed) / `-1` (no expiry) / `-2` (missing)
`HPEXPIRE`	`HPEXPIRE key ms FIELDS count field [field ...]`	Same as HEXPIRE but milliseconds
`HPTTL`	`HPTTL key FIELDS count field [field ...]`	Same as HTTL but milliseconds
`HEXPIRETIME`	`HEXPIRETIME key FIELDS count field [field ...]`	Absolute Unix timestamp (seconds)
`HGETDEL`	`HGETDEL key FIELDS count field [field ...]`	List of values (nil for missing)
`HGETEX`	`HGETEX key [EX sec\|PX ms\|EXAT ts\|PXAT ms\|PERSIST] FIELDS count field [...]`	List of values
`HSETEX`	`HSETEX key seconds field value [field value ...]`	Count of new fields

Redis compat: These follow the Redis 7.4+ hash field expiry syntax.

List Commands

Lists are stored via ListOps using compound keys. Each element is individually addressable. Push operations notify any blocking waiters (BLPOP/BRPOP).

LPUSH / RPUSH

Push one or more elements to the head or tail. Returns the new list length.


RESP3 syntax	`LPUSH key element [element ...]`, `RPUSH key element [element ...]`
Embedded API	`FerricStore.lpush(key, elements)`, `FerricStore.rpush(key, elements)`
RESP3 return	Integer -- new length
Elixir return	`{:ok, integer()}`
Redis compat	Fully compatible

LPOP / RPOP

Pop one or more elements from head or tail.


RESP3 syntax	`LPOP key [count]`, `RPOP key [count]`
Embedded API	`FerricStore.lpop(key)`, `FerricStore.rpop(key)`
RESP3 return	Bulk string (single pop), Array (counted pop), null (empty/missing)
Elixir return	`{:ok, binary() \| nil}`
Redis compat	Fully compatible. Count=0 returns empty list if key exists, nil if not.

LRANGE

Returns elements in the specified range. Supports negative indices.


RESP3 syntax	`LRANGE key start stop`
Embedded API	`FerricStore.lrange(key, start, stop)`
RESP3 return	Array of bulk strings
Elixir return	`{:ok, [binary()]}`
Redis compat	Fully compatible

LLEN / LINDEX / LSET / LREM / LTRIM / LPOS / LINSERT

Command	Syntax	Return	Notes
`LLEN`	`LLEN key`	Integer	Redis-compatible
`LINDEX`	`LINDEX key index`	Bulk string / null	Supports negative indices
`LSET`	`LSET key index element`	`+OK` or error	Redis-compatible
`LREM`	`LREM key count element`	Integer (removed count)	count>0: head-to-tail, count<0: tail-to-head, count=0: all
`LTRIM`	`LTRIM key start stop`	`+OK`	Redis-compatible
`LPOS`	`LPOS key element [RANK r] [COUNT c] [MAXLEN m]`	Integer / Array / null	RANK 0 is invalid
`LINSERT`	`LINSERT key BEFORE\|AFTER pivot element`	Integer (new length) / `-1` (pivot not found)	Redis-compatible

LMOVE / RPOPLPUSH

Atomically pops from one list and pushes to another.


RESP3 syntax	`LMOVE source destination LEFT\|RIGHT LEFT\|RIGHT`
Embedded API	`FerricStore.lmove(src, dst, from, to)`
Redis compat	Fully compatible. `RPOPLPUSH` is an alias for `LMOVE source dest RIGHT LEFT`.

LPUSHX / RPUSHX

Push only if the list already exists. Returns 0 if the key does not exist.


RESP3 syntax	`LPUSHX key element [element ...]`, `RPUSHX key element [element ...]`
Redis compat	Fully compatible

BLPOP / BRPOP / BLMOVE / BLMPOP

Blocking variants of pop/move. These are only available in TCP/RESP3 mode -- not in embedded mode. When the list is empty, the connection blocks until an element is pushed or the timeout expires.

Set Commands

Each set member is stored as a compound key S:redis_key\0member -> "1". This allows O(1) membership testing.

SADD / SREM


RESP3 syntax	`SADD key member [member ...]`, `SREM key member [member ...]`
Embedded API	`FerricStore.sadd(key, members)`, `FerricStore.srem(key, members)`
RESP3 return	Integer -- count of members added/removed
Elixir return	`{:ok, integer()}`
Redis compat	Fully compatible. Type metadata cleaned up when set becomes empty.

SMEMBERS / SISMEMBER / SCARD

Command	Syntax	Return
`SMEMBERS`	`SMEMBERS key`	Array of members
`SISMEMBER`	`SISMEMBER key member`	`1` or `0`
`SCARD`	`SCARD key`	Integer -- set size

All Redis-compatible. Non-existent keys return empty/0.

SRANDMEMBER / SPOP


RESP3 syntax	`SRANDMEMBER key [count]`, `SPOP key [count]`
Redis compat	Fully compatible. Negative count for SRANDMEMBER allows duplicates (matches Redis). SPOP removes the selected members.

SDIFF / SINTER / SUNION

Set algebra operations across multiple keys.


RESP3 syntax	`SDIFF key [key ...]`, `SINTER key [key ...]`, `SUNION key [key ...]`
Embedded API	`FerricStore.sdiff(keys)`, `FerricStore.sinter(keys)`, `FerricStore.sunion(keys)`
RESP3 return	Array of members
Redis compat	Fully compatible. All keys are loaded into `MapSet` for computation.

SDIFFSTORE / SINTERSTORE / SUNIONSTORE

Store operations that compute set algebra and write the result to a destination key.


RESP3 syntax	`SDIFFSTORE dest key [key ...]`, `SINTERSTORE dest key [key ...]`, `SUNIONSTORE dest key [key ...]`
RESP3 return	Integer -- cardinality of the resulting set
Redis compat	Fully compatible. Destination is cleared and re-created.

SINTERCARD

Returns the cardinality of the intersection without creating a new set.


RESP3 syntax	`SINTERCARD numkeys key [key ...] [LIMIT limit]`
RESP3 return	Integer -- intersection cardinality (capped by LIMIT if provided)
Redis compat	Fully compatible

SMISMEMBER

Returns whether each member is a member of the set.


RESP3 syntax	`SMISMEMBER key member [member ...]`
RESP3 return	Array of `1` / `0`
Redis compat	Fully compatible

SMOVE

Atomically moves a member from source to destination set.


RESP3 syntax	`SMOVE source destination member`
RESP3 return	`1` (moved) or `0` (member not in source)
Redis compat	Fully compatible

SSCAN

Cursor-based iteration with optional MATCH and COUNT.


RESP3 syntax	`SSCAN key cursor [MATCH pattern] [COUNT count]`
Redis compat	Cursor is offset-based. Default COUNT is 10.

Sorted Set Commands

Each sorted set member is stored as Z:redis_key\0member -> score_string. Scores are float64 strings. For range queries, all members are loaded and sorted in memory -- adequate for typical cache workloads.

ZADD

Adds members with scores. Supports all Redis modifier flags.


RESP3 syntax	`ZADD key [NX\|XX] [GT\|LT] [CH] score member [score member ...]`
Embedded API	`FerricStore.zadd(key, [{score, member}, ...])`
RESP3 return	Integer -- count of elements added (or added+changed with CH)
Elixir return	`{:ok, integer()}`

Options:

NX -- only add new elements, don't update existing
XX -- only update existing elements, don't add new
GT -- only update when new score > current score
LT -- only update when new score < current score
CH -- return count of added + changed (instead of just added)

Redis compat: Fully compatible.

ZSCORE / ZMSCORE


RESP3 syntax	`ZSCORE key member`, `ZMSCORE key member [member ...]`
RESP3 return	Bulk string (score) or null
Redis compat	Fully compatible

ZRANK / ZREVRANK

Returns zero-based rank of a member.


RESP3 syntax	`ZRANK key member`, `ZREVRANK key member`
RESP3 return	Integer or null (member not found)
Redis compat	Fully compatible

ZRANGE / ZREVRANGE

Range query by index with optional WITHSCORES.


RESP3 syntax	`ZRANGE key start stop [WITHSCORES]`, `ZREVRANGE key start stop [WITHSCORES]`
Embedded API	`FerricStore.zrange(key, start, stop, withscores: bool)`
RESP3 return	Array of members, or interleaved `[member, score, ...]` with WITHSCORES
Redis compat	The legacy index-based syntax is fully compatible. The Redis 6.2+ unified `ZRANGE` syntax (BYSCORE/BYLEX/REV/LIMIT) is NOT yet supported -- use `ZRANGEBYSCORE`/`ZREVRANGEBYSCORE` instead.

ZRANGEBYSCORE / ZREVRANGEBYSCORE

Range by score with optional WITHSCORES and LIMIT.


RESP3 syntax	`ZRANGEBYSCORE key min max [WITHSCORES] [LIMIT offset count]`
Supported bounds	Numeric, `-inf`, `+inf`, `(exclusive` prefix
Redis compat	Fully compatible. Negative LIMIT count means "all remaining".

ZCOUNT

Count members with scores in the given range.


RESP3 syntax	`ZCOUNT key min max`
Redis compat	Fully compatible. Supports `-inf`, `+inf`, and `(exclusive`.

ZINCRBY

Increment the score of a member. Creates the member if it does not exist.


RESP3 syntax	`ZINCRBY key increment member`
RESP3 return	Bulk string -- the new score
Redis compat	Fully compatible

ZPOPMIN / ZPOPMAX

Pop the lowest/highest scored members.


RESP3 syntax	`ZPOPMIN key [count]`, `ZPOPMAX key [count]`
RESP3 return	Array of `[member, score, ...]`
Redis compat	Fully compatible. Cleans up type metadata when empty.

ZRANDMEMBER / ZSCAN / ZCARD / ZREM

Command	Redis compat
`ZRANDMEMBER key [count [WITHSCORES]]`	Fully compatible. Negative count allows duplicates.
`ZSCAN key cursor [MATCH pattern] [COUNT count]`	Offset-based cursor
`ZCARD key`	Fully compatible
`ZREM key member [member ...]`	Fully compatible

Stream Commands

Stream entries are stored as compound keys X:{stream_key}\0{ms}-{seq} with field-value pairs serialized as ETF. Stream metadata (length, first/last ID, sequence counters) is tracked in an ETS table for fast access. Stream IDs use a Hybrid Logical Clock (HLC) for monotonicity, even when the wall clock jumps backward.

XADD

Adds an entry to a stream with optional trimming and NOMKSTREAM.


RESP3 syntax	`XADD key [NOMKSTREAM] [MAXLEN\|MINID [=\|~] threshold] *\|ID field value [field value ...]`
Embedded API	`FerricStore.xadd(key, fields)`
RESP3 return	Bulk string -- the generated entry ID
Elixir return	`{:ok, binary()}`

ID generation: * auto-generates using HLC. Explicit IDs must be strictly greater than the last entry. Partial IDs (just milliseconds) auto-assign the sequence.

Redis compat: Fully compatible, including NOMKSTREAM and trim options.

XLEN / XRANGE / XREVRANGE

Command	Syntax	Return	Notes
`XLEN`	`XLEN key`	Integer	From ETS metadata, O(1)
`XRANGE`	`XRANGE key start end [COUNT count]`	Array of entries	`-` = min, `+` = max
`XREVRANGE`	`XREVRANGE key end start [COUNT count]`	Array (reversed)	Redis-compatible

XREAD

Reads entries from one or more streams. Supports BLOCK for waiting on new data.


RESP3 syntax	`XREAD [COUNT count] [BLOCK ms] STREAMS key [key ...] id [id ...]`
Special IDs	`$` = only new entries from now on; `0` = all entries
BLOCK behavior	In TCP mode, the connection registers as a stream waiter and is notified by XADD. In embedded mode, BLOCK is not supported.
Redis compat	Fully compatible in TCP mode. BLOCK 0 = infinite wait.

XTRIM / XDEL

Command	Syntax	Return	Notes
`XTRIM`	`XTRIM key MAXLEN\|MINID [=\|~] threshold`	Integer (entries deleted)	`~` is accepted but exact trim is always applied
`XDEL`	`XDEL key id [id ...]`	Integer (entries deleted)	Metadata rebuilt after deletion

XINFO STREAM

Returns stream metadata as a map.


RESP3 syntax	`XINFO STREAM key`
RESP3 return	Map with `length`, `first-entry`, `last-entry`, `last-generated-id`, `groups`
Redis compat	Subset of Redis XINFO. FULL option not yet supported.

XGROUP CREATE / XREADGROUP / XACK

Consumer group support:

Command	Syntax	Notes
`XGROUP CREATE`	`XGROUP CREATE key group id [MKSTREAM]`	`$` for new-only, `0` for all
`XREADGROUP`	`XREADGROUP GROUP group consumer [COUNT count] STREAMS key [key ...] id [id ...]`	`>` for new messages, `0` for pending
`XACK`	`XACK key group id [id ...]`	Returns count acknowledged

Consumer group state (pending entries, consumers, last-delivered-id) is tracked in ETS. XGROUP DESTROY, DELCONSUMER, and SETID are not yet implemented.

Key/Generic Commands

TYPE

Returns the type of a key as a simple string.


RESP3 syntax	`TYPE key`
RESP3 return	Simple string: `string`, `hash`, `list`, `set`, `zset`, `stream`, or `none`
Redis compat	Fully compatible

RENAME / RENAMENX / COPY

Command	Syntax	Return	Notes
`RENAME`	`RENAME key newkey`	`+OK` or error	Copies value+TTL, deletes old
`RENAMENX`	`RENAMENX key newkey`	`1` (renamed) or `0` (dest exists)	Same key returns 0
`COPY`	`COPY source dest [REPLACE]`	`1` (success) or error	REPLACE overwrites existing dest

Note: These operate on plain string keys only. Renaming compound data structures (hash, list, set, zset) is not supported -- only the raw value is copied.

SCAN

Cursor-based key iteration with optional MATCH pattern, COUNT hint, and TYPE filter.


RESP3 syntax	`SCAN cursor [MATCH pattern] [COUNT count] [TYPE type]`
RESP3 return	`[next_cursor, [key, ...]]`

FerricStore behavior: Cursor is the last key seen (alphabetic). "0" starts from the beginning. The prefix index is used for prefix:* patterns for O(matching) performance. Internal compound keys (H:, S:, Z:, T:, VM:, V:) are filtered out.

RANDOMKEY / DBSIZE / KEYS

Command	Syntax	Return
`RANDOMKEY`	`RANDOMKEY`	Random key or null
`DBSIZE`	`DBSIZE`	Integer -- key count (excludes internal keys)
`KEYS`	`KEYS pattern`	Array of matching keys. Uses prefix index for `prefix:*` patterns.

EXPIRE / PEXPIRE / EXPIREAT / PEXPIREAT / TTL / PTTL / PERSIST

Command	Syntax	Return
`EXPIRE`	`EXPIRE key seconds`	`1` (set) or `0` (key missing)
`PEXPIRE`	`PEXPIRE key ms`	`1` or `0`
`EXPIREAT`	`EXPIREAT key unix-ts`	`1` or `0`
`PEXPIREAT`	`PEXPIREAT key unix-ts-ms`	`1` or `0`
`TTL`	`TTL key`	Seconds remaining, `-1` (no expiry), `-2` (missing)
`PTTL`	`PTTL key`	Milliseconds remaining, `-1`, `-2`
`PERSIST`	`PERSIST key`	`1` (removed), `0` (no expiry or missing)
`EXPIRETIME`	`EXPIRETIME key`	Absolute Unix timestamp (seconds), `-1`, `-2`
`PEXPIRETIME`	`PEXPIRETIME key`	Absolute Unix timestamp (ms), `-1`, `-2`

All Redis-compatible. Expiry uses HLC timestamps internally.

OBJECT

Subcommand	Return	Notes
`OBJECT ENCODING key`	Type-specific encoding	Returns `"embstr"` (strings <= 44 bytes), `"raw"` (longer strings), `"hashtable"` (hashes), `"quicklist"` (lists), `"skiplist"` (sorted sets), `"stream"` (streams)
`OBJECT HELP`	Array of help strings	Redis-compatible format
`OBJECT FREQ key`	Integer (LFU counter)	Uses keydir LFU, not Redis logarithmic frequency
`OBJECT IDLETIME key`	Integer (idle seconds)	Derived from LFU last-decrement-time. Returns elapsed seconds since last access.
`OBJECT REFCOUNT key`	`1`	Always 1

WAIT


RESP3 syntax	`WAIT numreplicas timeout`
RESP3 return	`0` (always)
Redis compat	Stub -- no replica acknowledgement. Always returns immediately.

Bitmap Commands

Bitmap operations work at the bit level on string values. Bits are numbered MSB-first: bit 0 is the MSB of byte 0 (value 128). Write operations (SETBIT, BITOP) perform a read-modify-write cycle.

Command	Syntax	Return	Redis compat
`SETBIT`	`SETBIT key offset value`	Integer (old bit value)	Fully compatible
`GETBIT`	`GETBIT key offset`	Integer (0 or 1)	Fully compatible
`BITCOUNT`	`BITCOUNT key [start end [BYTE\|BIT]]`	Integer (count of set bits)	Fully compatible including BYTE/BIT mode
`BITPOS`	`BITPOS key bit [start [end [BYTE\|BIT]]]`	Integer (position or -1)	Fully compatible
`BITOP`	`BITOP AND\|OR\|XOR\|NOT destkey key [key ...]`	Integer (dest string length)	Fully compatible

HyperLogLog Commands

HyperLogLog sketches are stored as 16,384-byte binary values (plain strings in Bitcask). No special type metadata.

Command	Syntax	Return	Redis compat
`PFADD`	`PFADD key element [element ...]`	`1` (modified) or `0`	Fully compatible
`PFCOUNT`	`PFCOUNT key [key ...]`	Integer (estimated cardinality)	Multi-key merges in memory without writing
`PFMERGE`	`PFMERGE destkey sourcekey [sourcekey ...]`	`+OK`	Fully compatible. Takes max across registers.

Bloom Filter Commands

Backed by mmap NIF resources. Each filter is a memory-mapped file at data_dir/prob/shard_N/KEY.bloom. Handles are cached in per-shard ETS tables.

Command	Syntax	Return	Notes
`BF.RESERVE`	`BF.RESERVE key error_rate capacity`	`+OK` or error	error_rate: (0,1), capacity: positive int
`BF.ADD`	`BF.ADD key element`	`1` (added) or `0`	Auto-creates with defaults (0.01, 100)
`BF.MADD`	`BF.MADD key element [element ...]`	Array of 1/0	Auto-creates
`BF.EXISTS`	`BF.EXISTS key element`	`1` (may exist) or `0`	Returns 0 for non-existent keys
`BF.MEXISTS`	`BF.MEXISTS key element [element ...]`	Array of 1/0	Returns all 0s for non-existent keys
`BF.CARD`	`BF.CARD key`	Integer	Items added count
`BF.INFO`	`BF.INFO key`	Array: Capacity, Size, filters, items, expansion, error rate, hashes, bits

Redis compat: Compatible with RedisBloom module syntax. Optimal sizing uses m = -n*ln(p) / (ln(2))^2. No scaling/expansion support (single filter).

Cuckoo Filter Commands

Backed by mmap NIF resources at data_dir/prob/shard_N/KEY.cuckoo. Supports deletion (unlike Bloom).

Command	Syntax	Return	Notes
`CF.RESERVE`	`CF.RESERVE key capacity`	`+OK` or error	Bucket size: 4
`CF.ADD`	`CF.ADD key element`	`1` or error (filter full)	Auto-creates with capacity 1024
`CF.ADDNX`	`CF.ADDNX key element`	`1` (added), `0` (already exists), or error
`CF.DEL`	`CF.DEL key element`	`1` (deleted) or `0` (not found)	Deletes one occurrence
`CF.EXISTS`	`CF.EXISTS key element`	`1` or `0`
`CF.MEXISTS`	`CF.MEXISTS key element [element ...]`	Array of 1/0
`CF.COUNT`	`CF.COUNT key element`	Integer (approximate count)	Fingerprint occurrences
`CF.INFO`	`CF.INFO key`	Array: Size, buckets, filters, items, deletes, bucket_size, fingerprint_size, max_kicks, expansion

Redis compat: Compatible with RedisBloom/Cuckoo module syntax.

Count-Min Sketch Commands

Backed by mmap NIF resources at data_dir/prob/shard_N/KEY.cms.

Command	Syntax	Return	Notes
`CMS.INITBYDIM`	`CMS.INITBYDIM key width depth`	`+OK`	width and depth must be > 0
`CMS.INITBYPROB`	`CMS.INITBYPROB key error probability`	`+OK`	width = ceil(e/error), depth = ceil(ln(1/prob))
`CMS.INCRBY`	`CMS.INCRBY key item count [item count ...]`	Array of counts	Each count >= 1
`CMS.QUERY`	`CMS.QUERY key item [item ...]`	Array of estimated counts
`CMS.MERGE`	`CMS.MERGE dst numkeys key [key ...] [WEIGHTS w ...]`	`+OK`	All sources must have same width/depth. Creates dst if missing.
`CMS.INFO`	`CMS.INFO key`	`[width, W, depth, D, count, C]`

Redis compat: Compatible with RedisBloom CMS module syntax.

TopK Commands

Backed by mmap NIF resources at prob/shard_N/KEY.topk. Uses Count-Min Sketch internally with a Heavy Keeper algorithm.

Command	Syntax	Return	Notes
`TOPK.RESERVE`	`TOPK.RESERVE key k [width depth decay]`	`+OK`	Defaults: width=8, depth=7, decay=0.9
`TOPK.ADD`	`TOPK.ADD key element [element ...]`	Array (evicted items or nil)
`TOPK.INCRBY`	`TOPK.INCRBY key element count [element count ...]`	Array (evicted items or nil)
`TOPK.QUERY`	`TOPK.QUERY key element [element ...]`	Array of 1/0
`TOPK.LIST`	`TOPK.LIST key [WITHCOUNT]`	Array of items (or interleaved items+counts)
`TOPK.INFO`	`TOPK.INFO key`	`[k, K, width, W, depth, D, decay, D]`

Redis compat: Compatible with RedisBloom TopK module syntax.

TDigest Commands

T-digests provide accurate rank-based statistics (quantiles, CDF, trimmed means) with bounded memory and high accuracy at the tails (P99, P99.9). Stored as tagged tuples {:tdigest, centroids, metadata} in Bitcask.

Command	Syntax	Return	Notes
`TDIGEST.CREATE`	`TDIGEST.CREATE key [COMPRESSION c]`	`+OK`	Default compression: 100
`TDIGEST.ADD`	`TDIGEST.ADD key value [value ...]`	`+OK`	Accepts floats and integers
`TDIGEST.RESET`	`TDIGEST.RESET key`	`+OK`	Clears data, preserves compression
`TDIGEST.QUANTILE`	`TDIGEST.QUANTILE key q [q ...]`	Array of float strings	q must be in [0, 1]
`TDIGEST.CDF`	`TDIGEST.CDF key value [value ...]`	Array of float strings	CDF at each value
`TDIGEST.RANK`	`TDIGEST.RANK key value [value ...]`	Array of integers	Estimated rank
`TDIGEST.REVRANK`	`TDIGEST.REVRANK key value [value ...]`	Array of integers	Reverse rank
`TDIGEST.BYRANK`	`TDIGEST.BYRANK key rank [rank ...]`	Array of float strings	Value at rank
`TDIGEST.BYREVRANK`	`TDIGEST.BYREVRANK key rank [rank ...]`	Array of float strings	Value at reverse rank
`TDIGEST.TRIMMED_MEAN`	`TDIGEST.TRIMMED_MEAN key lo hi`	Float string	lo must be < hi
`TDIGEST.MIN`	`TDIGEST.MIN key`	Float string or `"nan"`
`TDIGEST.MAX`	`TDIGEST.MAX key`	Float string or `"nan"`
`TDIGEST.INFO`	`TDIGEST.INFO key`	Array: Compression, Capacity, Merged/Unmerged nodes, weights, total_compressions, Memory usage
`TDIGEST.MERGE`	`TDIGEST.MERGE dest numkeys key [key ...] [COMPRESSION c] [OVERRIDE]`	`+OK`	OVERRIDE replaces dest; without it, merges into existing

Redis compat: Compatible with RedisBloom TDigest module syntax.

Geo Commands

Geo is implemented on top of Sorted Sets. Members are stored with 52-bit interleaved geohash scores (26 bits per axis, ~0.6mm precision), matching Redis's encoding. No new data structure is needed.

Command	Syntax	Return	Notes
`GEOADD`	`GEOADD key [NX\|XX] [CH] lon lat member [...]`	Integer (added)	Same flags as ZADD
`GEOPOS`	`GEOPOS key member [member ...]`	Array of `[lon, lat]` or null
`GEODIST`	`GEODIST key member1 member2 [M\|KM\|FT\|MI]`	Bulk string (distance) or null	Default unit: meters
`GEOHASH`	`GEOHASH key member [member ...]`	Array of 11-char base32 strings	Standard geohash alphabet
`GEOSEARCH`	`GEOSEARCH key FROMLONLAT lon lat\|FROMMEMBER member BYRADIUS radius unit\|BYBOX w h unit [ASC\|DESC] [COUNT count [ANY]] [WITHCOORD] [WITHDIST] [WITHHASH]`	Array	Full Redis GEOSEARCH syntax
`GEOSEARCHSTORE`	`GEOSEARCHSTORE dest source [GEOSEARCH opts] [STOREDIST]`	Integer (stored count)

Redis compat: Fully compatible including all GEOSEARCH options.

JSON Commands

JSON commands use JSONPath (subset) for traversal. JSON values are stored as tagged tuples {:json, json_string} in Bitcask. Every operation deserializes, mutates, and re-serializes.

Command	Syntax	Return	Notes
`JSON.SET`	`JSON.SET key path value [NX\|XX]`	`+OK` or null	NX/XX conditions
`JSON.GET`	`JSON.GET key [path ...]`	JSON string	Multiple paths returns object
`JSON.DEL`	`JSON.DEL key [path]`	Integer (1 deleted, 0 not found)	Omit path = delete entire key
`JSON.NUMINCRBY`	`JSON.NUMINCRBY key path number`	String (new number)
`JSON.TYPE`	`JSON.TYPE key [path]`	String: `object`, `array`, `string`, `number`, `boolean`, `null`
`JSON.STRLEN`	`JSON.STRLEN key [path]`	Integer or null
`JSON.OBJKEYS`	`JSON.OBJKEYS key [path]`	Array of strings
`JSON.OBJLEN`	`JSON.OBJLEN key [path]`	Integer
`JSON.ARRAPPEND`	`JSON.ARRAPPEND key path value [value ...]`	Integer (new length)
`JSON.ARRLEN`	`JSON.ARRLEN key [path]`	Integer
`JSON.TOGGLE`	`JSON.TOGGLE key path`	Integer (0/1 for false/true)
`JSON.CLEAR`	`JSON.CLEAR key [path]`	Integer (1 cleared, 0 not)	Sets numbers to 0, arrays/objects to empty
`JSON.MGET`	`JSON.MGET key [key ...] path`	Array of JSON strings

JSONPath subset (v1): $, $.field, $.field.subfield, $[0], $.field[0].name.

Redis compat: Compatible with Redis 8 / RedisJSON syntax for the supported subset.

FerricStore-Native Commands

These commands extend beyond the Redis command set with operations not available in standard Redis.

CAS (Compare-and-Swap)

Atomically sets a key only if its current value matches the expected value. Routed directly through Router.cas/4.


RESP3 syntax	`CAS key expected new_value [EX seconds]`
Embedded API	`FerricStore.cas(key, expected, new_value)`
RESP3 return	`1` (swapped), `0` (value mismatch), null (key missing)
Elixir return	`{:ok, true}`, `{:ok, false}`, or `{:ok, nil}`

LOCK / UNLOCK / EXTEND

Distributed lock with owner identity and TTL. Routed through Router.lock/3, Router.unlock/2, Router.extend/3.

Command	Syntax	Return
`LOCK`	`LOCK key owner ttl_ms`	`+OK` (acquired) or `ERR` (already held)
`UNLOCK`	`UNLOCK key owner`	`1` (released) or `ERR` (wrong owner / not held)
`EXTEND`	`EXTEND key owner ttl_ms`	`1` (extended) or `ERR` (wrong owner / not held)

RATELIMIT.ADD

Sliding window rate limiter. Routed through Router.ratelimit_add/4.


RESP3 syntax	`RATELIMIT.ADD key window_ms max_count [count]`
Embedded API	`FerricStore.ratelimit_add(key, window_ms, max)`
Return	Array: `[allowed (0\|1), current_count, remaining, retry_after_ms]`
Default count	1

FETCH_OR_COMPUTE

Cache-aside with stampede protection. The first caller to a missing key is designated the "computer" -- all concurrent callers block until the value is available.

Command	Syntax	Return
`FETCH_OR_COMPUTE`	`FETCH_OR_COMPUTE key ttl_ms [hint]`	`["hit", value]` or `["compute", channel]`
`FETCH_OR_COMPUTE_RESULT`	`FETCH_OR_COMPUTE_RESULT key value ttl_ms`	`+OK`
`FETCH_OR_COMPUTE_ERROR`	`FETCH_OR_COMPUTE_ERROR key message`	`+OK`

KEY_INFO

Returns diagnostic metadata about a key.


RESP3 syntax	`KEY_INFO key` (or `FERRICSTORE.KEY_INFO key`)
Return	Array: `[type, T, value_size, N, ttl_ms, N, hot_cache_status, hot\|cold, last_write_shard, N]`

Server Commands

PING / ECHO

Command	Syntax	Return
`PING`	`PING [message]`	`+PONG` (no args), or bulk string (with message)
`ECHO`	`ECHO message`	Bulk string

INFO

Returns server information. Supports sections: server, clients, memory, keyspace, stats, persistence, replication, cpu, namespace_config, raft, bitcask, ferricstore, keydir_analysis. Use all or everything for all sections.


RESP3 syntax	`INFO [section]`
FerricStore sections	`raft` (per-shard role/term/commit), `bitcask` (per-shard file counts/sizes), `ferricstore` (raft committed, hot cache evictions), `keydir_analysis` (per-prefix key breakdown), `namespace_config` (group-commit settings)

The server section reports redis_version: 7.4.0 for client compatibility along with ferricstore_version: 0.3.5.

CONFIG

Subcommand	Syntax	Notes
`CONFIG GET`	`CONFIG GET pattern`	Glob pattern matching
`CONFIG SET`	`CONFIG SET key value`	Changes logged to audit log
`CONFIG SET LOCAL`	`CONFIG SET LOCAL key value`	Node-local config override
`CONFIG GET LOCAL`	`CONFIG GET LOCAL key`	Read node-local config
`CONFIG RESETSTAT`	`CONFIG RESETSTAT`	Resets stats + slowlog
`CONFIG REWRITE`	`CONFIG REWRITE`	Persists config changes

SLOWLOG

Subcommand	Syntax	Return
`SLOWLOG GET`	`SLOWLOG GET [count]`	Array of `[id, timestamp_us, duration_us, command]`
`SLOWLOG LEN`	`SLOWLOG LEN`	Integer
`SLOWLOG RESET`	`SLOWLOG RESET`	`+OK`

COMMAND

Subcommand	Syntax	Return
`COMMAND`	`COMMAND`	Array of command info tuples
`COMMAND COUNT`	`COMMAND COUNT`	Integer
`COMMAND LIST`	`COMMAND LIST`	Array of command names
`COMMAND INFO`	`COMMAND INFO name [name ...]`	Array of info tuples (null for unknown)
`COMMAND DOCS`	`COMMAND DOCS name [name ...]`	Interleaved `[name, [summary]]`
`COMMAND GETKEYS`	`COMMAND GETKEYS cmd [args ...]`	Array of key arguments

CLIENT

Handled via dispatch_client/3 with per-connection state:

Subcommand	Syntax	Return
`CLIENT ID`	`CLIENT ID`	Integer (connection ID)
`CLIENT SETNAME`	`CLIENT SETNAME name`	`+OK`
`CLIENT GETNAME`	`CLIENT GETNAME`	Bulk string or null
`CLIENT INFO`	`CLIENT INFO`	Info string for current connection
`CLIENT LIST`	`CLIENT LIST [TYPE type]`	Info string for all connections
`CLIENT TRACKING`	`CLIENT TRACKING ON\|OFF [REDIRECT id] [PREFIX ...] [BCAST] [OPTIN] [OPTOUT] [NOLOOP]`	`+OK`
`CLIENT CACHING`	`CLIENT CACHING YES\|NO`	`+OK`
`CLIENT TRACKINGINFO`	`CLIENT TRACKINGINFO`	Tracking configuration
`CLIENT GETREDIR`	`CLIENT GETREDIR`	Integer (redirect target or 0)

Other Server Commands

Command	Syntax	Return	Notes
`FLUSHDB`	`FLUSHDB [ASYNC\|SYNC]`	`+OK`	Both modes execute synchronously
`FLUSHALL`	`FLUSHALL [ASYNC\|SYNC]`	`+OK`	Alias for FLUSHDB
`SELECT`	`SELECT db`	Error	Single-database only
`SAVE`	`SAVE`	`+OK`	No-op (Bitcask is always persisted)
`BGSAVE`	`BGSAVE`	`+Background saving started`	No-op
`LASTSAVE`	`LASTSAVE`	Integer (current timestamp)
`LOLWUT`	`LOLWUT [VERSION v]`	ASCII art	FerricStore branding
`DEBUG SLEEP`	`DEBUG SLEEP seconds`	`+OK`	Testing only. Logged to audit log.
`MODULE LIST`	`MODULE LIST`	Empty array	Modules not supported
`WAITAOF`	`WAITAOF numlocal numreplicas timeout`	`[0, 0]`	Stub
`MEMORY USAGE`	`MEMORY USAGE key`	Integer (estimated bytes)

Transaction Commands

Command	Syntax	Description
`MULTI`	`MULTI`	Start a transaction. Subsequent commands are queued (return `+QUEUED`).
`EXEC`	`EXEC`	Execute all queued commands atomically. Returns array of results. Returns null if WATCH detected a change.
`DISCARD`	`DISCARD`	Discard queued commands, exit MULTI state.
`WATCH`	`WATCH key [key ...]`	Watch keys for changes. If any watched key is modified before EXEC, the transaction is aborted.
`UNWATCH`	`UNWATCH`	Stop watching all keys.

Transactions work at the connection level. WATCH implements optimistic locking -- if a watched key is modified by another connection between WATCH and EXEC, EXEC returns null (transaction aborted).

Pub/Sub Commands

Command	Syntax	Return
`SUBSCRIBE`	`SUBSCRIBE channel [channel ...]`	Push messages: `[subscribe, channel, count]`
`UNSUBSCRIBE`	`UNSUBSCRIBE [channel ...]`	Push messages: `[unsubscribe, channel, count]`
`PSUBSCRIBE`	`PSUBSCRIBE pattern [pattern ...]`	Push messages: `[psubscribe, pattern, count]`
`PUNSUBSCRIBE`	`PUNSUBSCRIBE [pattern ...]`	Push messages: `[punsubscribe, pattern, count]`
`PUBLISH`	`PUBLISH channel message`	Integer (subscribers that received)
`PUBSUB CHANNELS`	`PUBSUB CHANNELS [pattern]`	Array of active channels
`PUBSUB NUMSUB`	`PUBSUB NUMSUB [channel ...]`	Array of `[channel, count, ...]`
`PUBSUB NUMPAT`	`PUBSUB NUMPAT`	Integer (pattern subscriptions)

ACL Commands

Command	Syntax	Description
`ACL SETUSER`	`ACL SETUSER username [rule ...]`	Create/update user
`ACL DELUSER`	`ACL DELUSER username [username ...]`	Delete user(s)
`ACL GETUSER`	`ACL GETUSER username`	Get user info
`ACL LIST`	`ACL LIST`	List all users
`ACL WHOAMI`	`ACL WHOAMI`	Current user
`ACL SAVE`	`ACL SAVE`	Persist ACL to file
`ACL LOAD`	`ACL LOAD`	Load ACL from file
`AUTH`	`AUTH [username] password`	Authenticate connection

Differences from Redis -- Summary

Single database -- SELECT returns an error. FerricStore is single-database.
RESP3 only -- HELLO 3 is required. RESP2 is not supported.
No Lua scripting -- EVAL/EVALSHA are not implemented. Use CAS, LOCK, and FETCH_OR_COMPUTE for atomic operations.
No blocking commands in embedded mode -- BLPOP, BRPOP, BLMOVE, BLMPOP, XREAD BLOCK require a TCP connection.
Probabilistic structures are built-in -- no separate Redis Stack module needed. BF, CF, CMS, TopK, TDigest are all native.
CAS is a native command -- no need for Lua scripts for compare-and-swap. WATCH/MULTI/EXEC is also supported.
FETCH_OR_COMPUTE -- built-in cache stampede protection that Redis lacks.
Group commit -- writes are batched for higher throughput. Individual write latency includes the batch window (default 1ms). Use hash tags {tag} to colocate related keys on the same shard for maximum batching -- see Best Practices.
HLC timestamps -- expiry uses Hybrid Logical Clock timestamps instead of wall-clock time. Monotonic even during clock skew.
Compound key storage -- hash fields, set members, and zset members are stored as individual Bitcask entries with structured key prefixes, enabling O(1) field-level access without deserializing the entire data structure.
SCAN cursor -- uses alphabetic key position, not Redis's opaque hash-table cursor. Functionally equivalent but cursor values differ.
OBJECT ENCODING -- returns type-specific encodings ("embstr", "raw", "hashtable", "quicklist", "skiplist", "stream") but does not use Redis's memory-optimized internal encodings like ziplist, listpack, intset, or skiplist (Redis's native C implementation).
INFO sections -- includes FerricStore-specific sections: raft, bitcask, ferricstore, keydir_analysis, namespace_config.

← Previous Page Standalone Mode

Next Page → Configuration Reference