Converting to and from Elixir date/time types

Tempo treats every value as a bounded interval on the time line, never as an instant (see When to use Tempo for why). The moment you bring a stdlib Date, Time, NaiveDateTime, or DateTime into Tempo, it stops being a point and becomes a span.

This guide answers the two questions that follow from that:

• At what resolution does a converted value land?
• What interval does a "point in time" actually become — and why does the width matter?

Setup — required for every example

Every example uses the ~o sigil from Tempo.Sigils. Bring it into scope first:

import Tempo.Sigils

1. Stdlib → Tempo: the resolution you get

Tempo.from_elixir/2 is the unified gateway (there are also type-specific from_date/1, from_time/1, from_naive_date_time/1, from_date_time/1).

The rule is: resolution follows the type's declared precision, not the magnitude of its fields. Elixir's Time/NaiveDateTime/DateTime are second-granular by construction, so 09:00:00 is a fully specified second — not an under-specified hour. A zero component is still a specified component.

Tempo.from_elixir(~U[2022-07-04 14:30:00Z]) |> Tempo.resolution()
#=> {:second, 1}

To deliberately widen to a coarser span, pass :resolution:

# Treat a midnight value as the whole day, not the first second of it.
Tempo.from_elixir(~N[2022-07-04 00:00:00], resolution: :day)
#=> ~o"2022Y7M4D"

"Read a calendar value at the precision it was written; widen to a whole day only when you ask for it."

2. A point in time is an interval

Every Tempo value materialises to an explicit half-open [from, to) span via Tempo.to_interval/1. The width is one unit at the value's resolution — so the resolution from §1 decides the span:

{:ok, interval} = Tempo.from_elixir(~U[2022-07-04 14:30:45Z]) |> Tempo.to_interval()
Tempo.Interval.duration(interval)
#=> ~o"PT1S"

{:ok, day} = Tempo.from_elixir(~D[2022-07-04]) |> Tempo.to_interval()
Tempo.Interval.duration(day)
#=> ~o"PT86400S"   # one whole day

The upper bound is exclusive ([from, to)), which is what makes the spans tile the time line cleanly — [2022-07-04, 2022-07-05) followed by [2022-07-05, 2022-07-06) is exactly [2022-07-04, 2022-07-06) with no gap or overlap. See Enumeration semantics for how this drives iteration, and Tempo.to_interval/2 for the full materialisation contract.

"A day is the span from this midnight to the next; a timestamp is the span from this second to the next."

Two notes:

• Sub-second spans and duration/1. duration/1 reports whole seconds, so a one-microsecond interval reads as ~o"PT0S". The span is still one microsecond wide — inspect the endpoints (from/1, to/1) when you need sub-second extent.

• A bare Time materialises non-anchored. ~T[14:30:00] becomes T14H30M0S/T14H30M1S — a one-second span on the time-of-day axis with no date. Operations that need an absolute position (duration in wall-clock seconds, cross-zone comparison) require anchoring it to a date first.

3. Why the width matters

This is the whole point of the interval model, and the place stdlib intuition trips up. Because each "instant" is really a half-open one-unit span, two timestamps one second apart do not overlap — they meet at the shared boundary.

earlier = ~o"2022Y7M4DT14H30M45S"   # the span [45s, 46s)
later   = ~o"2022Y7M4DT14H30M46S"   # the span [46s, 47s)

Tempo.relation(earlier, later)
#=> :meets

Tempo.overlaps?(earlier, later)
#=> false

Identical timestamps are :equals; consecutive ones :meets; only a genuine span covering shared time :overlaps. That precision is exactly what lets free/busy scans, coalescing, and set operations be unambiguous — there is never a "do these touch?" grey area.

"9:30:45 and 9:30:46 don't clash — they're back-to-back."

And because a plain DateTime/NaiveDateTime now materialises (it infers to second resolution, and a second is a one-second span), converted timestamps drop straight into the set-algebra API:

{:ok, busy} = Tempo.union(~o"2022Y7M4DT14H30M45S", ~o"2022Y7M4DT14H30M46S")
#=> two adjacent one-second spans, ready for difference/intersection/…

4. Tempo → stdlib: projecting back out

Going the other way, you choose how much of the interval/zone information to keep:

to_naive_date_time/1 keeps the wall-clock numbers and discards the offset — exactly like the stdlib DateTime.to_naive/1. It does not shift to UTC:

# Paris is UTC+2 in summer; the wall reading is 10:30, not 08:30.
paris = Tempo.from_elixir(DateTime.new!(~D[2022-06-15], ~T[10:30:00], "Europe/Paris"))
Tempo.to_naive_date_time(paris)
#=> {:ok, ~N[2022-06-15 10:30:00.000000]}

When the zone matters, to_date_time/1 is the lossless inverse of from_elixir/2 on a DateTime — it preserves the named zone and re-derives the offset from the time-zone database:

Tempo.to_date_time(paris)
#=> {:ok, #DateTime<2022-06-15 10:30:00.000000+02:00 CEST Europe/Paris>}

If you want UTC wall time rather than the local reading, normalise explicitly first:

{:ok, utc} = Tempo.shift_zone(paris, "Etc/UTC")
Tempo.to_naive_date_time(utc)
#=> {:ok, ~N[2022-06-15 08:30:00.000000]}

Two caveats:

• Resolution must reach the target. A value coarser than a full datetime (e.g. ~o"2022-11") cannot fill a NaiveDateTime/DateTime and returns {:error, _}. Project to the type the value's resolution supports (to_date/1 for a day, to_time/1 for a time-of-day).

• Microsecond precision normalises to 6. A second-resolution value round-trips through {0, 0} → {0, 6} microseconds; the instant, zone, and wall reading are identical, only the precision tag widens.

5. Where to convert

Convert at the edges, compute in the middle:

• Edge layer (HTTP, DB, log parsing): stdlib types. Parse Unix timestamps and ISO strings into Date/DateTime.
• Domain layer (scheduling, availability, recurrence, set operations): Tempo. Convert in with from_elixir/2 when the next operation is interval-shaped.
• Display layer: Tempo.to_string/2 for locale-aware output, or the to_* projections above to hand a stdlib value back to non-Tempo code.

See When to use Tempo for the full decision tree.

Cheat sheet

# Stdlib → Tempo  (resolution = the type's precision; override with :resolution)
Tempo.from_date(~D[2026-06-15])                  # :day
Tempo.from_time(~T[14:30:00])                    # :second (time-of-day, non-anchored)
Tempo.from_naive_date_time(~N[2026-06-15 14:30:00])
Tempo.from_date_time(~U[2026-06-15 14:30:00Z])   # :second, zoned
Tempo.from_elixir(value, resolution: :day)       # unified gateway + explicit widen

# Point → interval  (every value is a span of one unit at its resolution)
Tempo.to_interval(tempo)                          # {:ok, %Interval{}} half-open [from, to)

# Tempo → Stdlib
Tempo.to_date(tempo)                              # zone dropped
Tempo.to_time(tempo)                              # zone dropped
Tempo.to_naive_date_time(tempo)                   # zone dropped (wall-clock, not UTC)
Tempo.to_date_time(tempo)                         # zone preserved (lossless)
Tempo.shift_zone(tempo, "Etc/UTC")                # normalise to UTC first if needed